Hiya,
On Tue, 19 Jan 1999, Chris Karakas wrote:
> your soundcard occupies the same irq as parport0. I don't know how
> parport handles this but I'd say you should have sound compiled only as
> a module.
> Apart from this, I can't think of anything else :-(
Hmm, Well the streamer is on port 1, not port 0, but I suppose the parport
stuff coould be messing up because one of the ports is sharing an IRQ..
I'll try removing the sound card. The sound stuff is compiled as a
module.
> This is normally done in the BIOS/Integrated peripherals/Parallel port
> mode or something similar.
Oh right... Unfortunately I don't have a manual for the IDE interface
(which has the port on it), so I'll have to play around with the jumpers a
bit... I'll have a go when I have some time.
Thanks for your help
- Steve ##################
[[EMAIL PROTECTED]] ####################
[[EMAIL PROTECTED]] ## DONT ##
[http://www.theankh.demon.co.uk] ## LOOK ##
[http://www.sucs.swan.ac.uk/~firefury] ## DOWN ##
####################
##################
##
--> Last one to kill a bad guy buys the beer <-- ## ## ##
######
##
