Friday February 26 1999 16:27, Carsten Becker wrote to linux-tape@vger.
rutgers.edu:
CB> uncompressing ftape-4.03-pre-2.tar.gz
Got this now.
CB> /installation/path/ftape-4.03-pre-2/MCONFIG
CB> /installation/path/ftape-4.03-pre-2/modules/insert
CB> /installation/path/ftape-4.03-pre-2/scripts/MAKEDEV.ftape
All these are there.
CB> _wihout any support_ for tapes. So don't use RH's MCONFIG version.
Done.
CB> Hope you can get along with this now.
This is now my 'insert':
=== Cut ===
#!/bin/bash
isapnp ./isapnp.conf
insmod ./ftape.o ft_fdc_driver=ftape-internal,bpck-fdc:trakker,none,
none ft_tracings=3,3,3,3,3
insmod ./zftape.o ft_major_device_number=27 # ${27-FT_MAJOR}
insmod ./ftape-internal.o ft_fdc_fc10=0 ft_fdc_mach2=0 ft_fdc_base=
0x210 ft_fdc_dma=0 ft_fdc_threshold=15 # ft_fdc_rate_limit=4000
;# Can't figure out how to put 82078 on the above line, instead of
mach2.
/usr/sbin/klogd -i
=== Cut ===
KS
