I have the same drive..I also am using that version of ftape..(I got it
compiled over the weekend.) I get "device not configured" too
"Michael J. Hoyt" wrote:
> I installed my parport Ditto Easy3200 Tape drive on dual-bootable laptop
> under windows to see if could get an idea of what system resources the
> drive was using. The tape worked but this angle turned out to not
> produce any information in the area of system resources. So at a
> minimum at least I know the parallel port is set correctly and that the
> tape drive worked with this PC.
>
> So I rebooted back to linux on this laptop and rebuilt and installed
> ftape. I get the same results as before.
>
> ftmt: /dev/qft0: Device not configured
>
> The modules are loaded, I have verified that.
>
> Does anybody reading this mailing list have any suggestions on what to
> try or comments on their experience using ftape and Iomega Ditto
> drives? Does anybody even read this mailing list? I haven't seen a
> single response to any of my postings.
>
> please help,
>
> Mike
