> That looks like a Mandrake kernel, so I doubt very much that it's got the
> current EHCI driver. And wasn't that a binary-only NVidia driver? Don't
> send problem reports for kernels that are using such proprieatary code.
> Instead, try 2.4.20-pre11 with the EHCI update (already mentioned on this
> list) that's identified at the top of
Yes it was a mandrake kernel. However. I posted a question to this list in the
same thread a couple of days ago asking where I could get the latest patch.
Greg responded and I then proceeded to download the patch and apply it to the
mandrake kernel I was using (I also tried 2.4.20-pre11). I then posted right
after that that it did not fix the problem but seemed to improve the
situation. My last post was to show the oops that was happening that I
previously could not see because my machine was hard locking. As for the
NVidia driver... it has no bearing on the problem I'm having. Below is
another oops from 2.4.20-pre11 with the ehci update and without the NVidia
driver loaded. The oops occured in the same location as in my previous post.
I've also attached my hardware info as you requested.
ksymoops 2.4.5 on i686 2.4.20-pre11. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.20-pre11/ (default)
-m /boot/System.map-2.4.20-pre11 (default)
Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.
Unable to handle kernel NULL pointer dereference at virtual address 00000058
*pde = 00000000
Oops: 0002
CPU: 0
EIP: 0010:[<f894b9f0>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010082
eax: 00000001 ebx: 00000000 ecx: 00000001 edx: c0303d14
esi: f7cf0600 edi: 00000000 ebp: c19cff70 esp: c19cff60
ds: 0018 es: 0018 ss: 0018
Process ksoftirqd_CPU0 (pid: 3, stackpage=c19cf000)
Stack: f7cf0728 c19ce000 f7cf0600 00000000 c19cff8c f894d5ec f7cf0600 c01197c6
f4222000 c01242a4 f7cf0630 c19cffa4 c0124083 f7cf0600 00000001 c02d8258
fffffff7 c19cffc4 c0123ecf c02d8258 00000246 00000000 00000000 c19ce000
Call Trace: [<f894d5ec>] [<c01197c6>] [<c01242a4>] [<c0124083>]
[<c0123ecf>]
[<c01244e5>] [<c0105000>] [<c01059ee>] [<c0124410>]
Code: c6 43 58 03 c7 43 48 00 00 00 00 89 5c 24 04 89 34 24 e8 e9
>>EIP; f894b9f0 <[ehci-hcd]end_unlink_async+20/90> <=====
>>edx; c0303d14 <tv1+614/804>
>>esi; f7cf0600 <_end+379bd328/3858cda8>
>>ebp; c19cff70 <_end+169cc98/3858cda8>
>>esp; c19cff60 <_end+169cc88/3858cda8>
Trace; f894d5ec <[ehci-hcd]ehci_tasklet+8c/90>
Trace; c01197c6 <schedule+346/630>
Trace; c01242a4 <bh_action+84/e0>
Trace; c0124083 <tasklet_action+63/a0>
Trace; c0123ecf <do_softirq+cf/e0>
Trace; c01244e5 <ksoftirqd+d5/100>
Trace; c0105000 <_stext+0/0>
Trace; c01059ee <kernel_thread+2e/40>
Trace; c0124410 <ksoftirqd+0/100>
Code; f894b9f0 <[ehci-hcd]end_unlink_async+20/90>
00000000 <_EIP>:
Code; f894b9f0 <[ehci-hcd]end_unlink_async+20/90> <=====
0: c6 43 58 03 movb $0x3,0x58(%ebx) <=====
Code; f894b9f4 <[ehci-hcd]end_unlink_async+24/90>
4: c7 43 48 00 00 00 00 movl $0x0,0x48(%ebx)
Code; f894b9fb <[ehci-hcd]end_unlink_async+2b/90>
b: 89 5c 24 04 mov %ebx,0x4(%esp,1)
Code; f894b9ff <[ehci-hcd]end_unlink_async+2f/90>
f: 89 34 24 mov %esi,(%esp,1)
Code; f894ba02 <[ehci-hcd]end_unlink_async+32/90>
12: e8 e9 00 00 00 call 100 <_EIP+0x100> f894baf0
<[ehci-hcd]start_unlink_async+90/130>
<0>Kernel panic: Aiee, killing interrupt handler!
NMI Watchdog detected LOCKUP on CPU1, eip f894df85, registers:
CPU: 1
EIP: 0010:[<f894df85>] Not tainted
EFLAGS: 00000086
eax: f6a15cc8 ebx: f7cf0680 ecx: f6a15c40 edx: f894e0c0
esi: f7cf0600 edi: 00000005 ebp: c19b5e9c esp: c19b5e74
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c19b5000)
Stack: 00000000 f20f2000 00000093 00000001 00000000 00000001 f20f2000 f6a15c40
00000282 f7cf0680 c19b5ec4 f88cf6e6 f7cf0680 f6a15cc8 c19b5ec4 c0122ed4
0000000e f7cf0694 f88cf5e0 00000040 c19b5ef8 c0128fe1 f6a15c40 f0eb4130
Call Trace: [<f88cf6e6>] [<c0122ed4>] [<f88cf5e0>] [<c0128fe1>]
[<c012875d>]
[<c01242a4>] [<c0124123>] [<c0123ecf>] [<c0109813>] [<c01054a0>]
[<c01054a0>]
[<c010c558>] [<c01054a0>] [<c01054cc>] [<c0105542>] [<c011e66d>]
[<c011e485>]
Code: f3 90 7e f8 e9 48 c3 ff ff 80 78 80 00 f3 90 7e f8 e9 01 c5
>>EIP; f894df85 <[ehci-hcd].text.lock.ehci_hcd+4/dc> <=====
>>eax; f6a15cc8 <_end+366e29f0/3858cda8>
>>ebx; f7cf0680 <_end+379bd3a8/3858cda8>
>>ecx; f6a15c40 <_end+366e2968/3858cda8>
>>edx; f894e0c0 <[ehci-hcd]ehci_driver+0/1d>
>>esi; f7cf0600 <_end+379bd328/3858cda8>
>>ebp; c19b5e9c <_end+1682bc4/3858cda8>
>>esp; c19b5e74 <_end+1682b9c/3858cda8>
Trace; f88cf6e6 <[usbcore]rh_report_status+106/210>
Trace; c0122ed4 <it_real_fn+24/60>
Trace; f88cf5e0 <[usbcore]rh_report_status+0/210>
Trace; c0128fe1 <run_timer_list+171/250>
Trace; c012875d <update_wall_time+d/40>
Trace; c01242a4 <bh_action+84/e0>
Trace; c0124123 <tasklet_hi_action+63/a0>
Trace; c0123ecf <do_softirq+cf/e0>
Trace; c0109813 <do_IRQ+183/190>
Trace; c01054a0 <default_idle+0/40>
Trace; c01054a0 <default_idle+0/40>
Trace; c010c558 <call_do_IRQ+5/d>
Trace; c01054a0 <default_idle+0/40>
Trace; c01054cc <default_idle+2c/40>
Trace; c0105542 <cpu_idle+42/60>
Trace; c011e66d <release_console_sem+11d/120>
Trace; c011e485 <printk+185/200>
Code; f894df85 <[ehci-hcd].text.lock.ehci_hcd+4/dc>
00000000 <_EIP>:
Code; f894df85 <[ehci-hcd].text.lock.ehci_hcd+4/dc> <=====
0: f3 90 repz nop <=====
Code; f894df87 <[ehci-hcd].text.lock.ehci_hcd+6/dc>
2: 7e f8 jle fffffffc <_EIP+0xfffffffc> f894df81
<[ehci-hcd].text.lock.ehci_hcd+0/dc>
Code; f894df89 <[ehci-hcd].text.lock.ehci_hcd+8/dc>
4: e9 48 c3 ff ff jmp ffffc351 <_EIP+0xffffc351> f894a2d6
<[ehci-hcd]ehci_hub_status_data+66/130>
Code; f894df8e <[ehci-hcd].text.lock.ehci_hcd+d/dc>
9: 80 78 80 00 cmpb $0x0,0xffffff80(%eax)
Code; f894df92 <[ehci-hcd].text.lock.ehci_hcd+11/dc>
d: f3 90 repz nop
Code; f894df94 <[ehci-hcd].text.lock.ehci_hcd+13/dc>
f: 7e f8 jle 9 <_EIP+0x9> f894df8e
<[ehci-hcd].text.lock.ehci_hcd+d/dc>
Code; f894df96 <[ehci-hcd].text.lock.ehci_hcd+15/dc>
11: e9 01 c5 00 00 jmp c517 <_EIP+0xc517> f895a49c
<[ehci-hcd].data.end+beb5/26a99>
1 warning issued. Results may not be reliable.
[root@angel root]# cat /proc/version
Linux version 2.4.20-pre11 ([EMAIL PROTECTED]) (gcc version 3.2 (Mandrake
Linux 9.0 3.2-1mdk)) #2 SMP Fri Oct 25 15:13:26 CDT 2002
[root@angel root]# /usr/src/linux-2.4.20-pre11/scripts/ver_linux
[1@s [1@h [1@
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux myhost.mydomain.com 2.4.20-pre11 #2 SMP Fri Oct 25 15:13:26 CDT 2002
i686 unknown unknown GNU/Linux
Gnu C 3.2
Gnu make 3.79.1
util-linux 2.11u
mount 2.11u
modutils 2.4.19
e2fsprogs 1.27ea
reiserfsprogs 3.6.3
PPP 2.4.1
Linux C Library 2.2.5
Dynamic linker (ldd) 2.2.5
Procps 2.0.7
Net-tools 1.60
Console-tools 0.2.3
Sh-utils 2.0.15
Modules Loaded usb-storage sr_mod cdrom floppy sg lp parport_pc
parport smbfs nfsd lockd sunrpc 3c59x keybdev mousedev hid usbmouse input
ohci1394 ieee1394 tvmixer bttv tuner msp3400 i2c-algo-bit i2c-core soundcore
videodev ehci-hcd usb-ohci usbcore rtc
[root@angel root]# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) MP 1800+
stepping : 2
cpu MHz : 1533.402
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3060.53
processor : 1
vendor_id : AuthenticAMD
cpu family : 6
model : 6
model name : AMD Athlon(tm) Processor
stepping : 2
cpu MHz : 1533.402
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36
mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 3060.53
[root@angel root]# cat /proc/modules
usb-storage 46272 1
sr_mod 13976 0 (autoclean) (unused)
cdrom 28384 0 (autoclean) [sr_mod]
floppy 52604 0 (autoclean)
sg 28876 0 (autoclean)
lp 7232 0
parport_pc 23656 1
parport 27136 1 [lp parport_pc]
smbfs 40912 4 (autoclean)
nfsd 74768 8 (autoclean)
lockd 51920 1 (autoclean) [nfsd]
sunrpc 75676 1 (autoclean) [nfsd lockd]
3c59x 28336 1 (autoclean)
keybdev 2080 0 (unused)
mousedev 4540 0 (unused)
hid 14120 0 (unused)
usbmouse 2272 0 (unused)
input 3616 0 [keybdev mousedev hid usbmouse]
ohci1394 19880 0 (unused)
ieee1394 36652 0 [ohci1394]
tvmixer 3760 0 (autoclean) (unused)
bttv 71104 0 (unused)
tuner 10016 1 (autoclean)
msp3400 17100 1
i2c-algo-bit 7496 1 [bttv]
i2c-core 13188 0 [tvmixer bttv tuner msp3400 i2c-algo-bit]
soundcore 4420 1 [tvmixer bttv]
videodev 6528 2 [bttv]
ehci-hcd 17896 0 (unused)
usb-ohci 19208 0 (unused)
usbcore 66752 1 [usb-storage hid usbmouse ehci-hcd usb-ohci]
rtc 9436 0 (autoclean)
[root@angel root]# cat /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
02f8-02ff : serial(auto)
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f8-03ff : serial(auto)
0cf8-0cff : PCI conf1
1000-10ff : Adaptec AHA-2940U2/U2W
1410-1413 : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System
Controller
2000-2fff : PCI Bus #02
2000-207f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
2000-207f : 02:08.0
2080-209f : Creative Labs SB Live! EMU10k1
20a0-20a7 : Creative Labs SB Live! MIDI/Game Port
f000-f00f : Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
[root@angel root]# cat /proc/iomem
00000000-0009ebff : System RAM
0009ec00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000cb800-000cbfff : Extension ROM
000cc000-000d25ff : Extension ROM
000f0000-000fffff : System ROM
00100000-3feeffff : System RAM
00100000-0024b309 : Kernel code
0024b30a-002b481f : Kernel data
3fef0000-3fefefff : ACPI Tables
3feff000-3fefffff : ACPI Non-volatile Storage
3ff00000-3fffffff : System RAM
f0000000-f0000fff : Adaptec AHA-2940U2/U2W
f0000000-f0000fff : aic7xxx
f1000000-f1ffffff : PCI Bus #01
f1000000-f1ffffff : nVidia Corporation NV20 [GeForce3]
f2000000-f21fffff : PCI Bus #02
f2001000-f2001fff : NEC Corporation USB
f2001000-f2001fff : usb-ohci
f2002000-f2002fff : NEC Corporation USB (#2)
f2002000-f2002fff : usb-ohci
f2003000-f20030ff : NEC Corporation USB 2.0
f2003000-f20030ff : ehci-hcd
f2003400-f200347f : 3Com Corporation 3c905C-TX/TX-M [Tornado]
f2100000-f21fffff : PCI Bus #03
f2100000-f2103fff : Texas Instruments TSB12LV26 IEEE-1394 Controller
(Link)
f2104000-f2104fff : NEC Corporation USB (#3)
f2104000-f2104fff : usb-ohci
f2105000-f2105fff : NEC Corporation USB (#4)
f2105000-f2105fff : usb-ohci
f2106000-f21067ff : Texas Instruments TSB12LV26 IEEE-1394 Controller
(Link)
f2106000-f21067ff : ohci1394
f2106800-f21068ff : NEC Corporation USB 2.0 (#2)
f2106800-f21068ff : ehci-hcd
f2200000-f2200fff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System
Controller
f4000000-f7ffffff : Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System
Controller
f8000000-fc0fffff : PCI Bus #01
f8000000-fbffffff : nVidia Corporation NV20 [GeForce3]
fc000000-fc07ffff : nVidia Corporation NV20 [GeForce3]
fc100000-fc1fffff : PCI Bus #02
fc100000-fc100fff : Brooktree Corporation Bt878 Video Capture
fc100000-fc100fff : bttv
fc101000-fc101fff : Brooktree Corporation Bt878 Audio Capture
fec00000-fec07fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
[root@angel root]# lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System
Controller (rev 11)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f4000000 (32-bit, prefetchable) [size=64M]
Region 1: Memory at f2200000 (32-bit, prefetchable) [size=4K]
Region 2: I/O ports at 1410 [disabled] [size=4]
Capabilities: [a0] AGP version 2.0
Status: RQ=15 SBA+ 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=x4
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP
Bridge (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 99
Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f1000000-f1ffffff
Prefetchable memory behind bridge: f8000000-fc0fffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev
04) (prog-if 8a [Master SecP PriP])
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at f000 [size=16]
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
Subsystem: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
00:09.0 SCSI storage controller: Adaptec AHA-2940U2/U2W
Subsystem: Adaptec AHA-2940U2W SCSI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (9750ns min, 6250ns max)
Interrupt: pin A routed to IRQ 11
BIST result: 00
Region 0: I/O ports at 1000 [disabled] [size=256]
Region 1: Memory at f0000000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 04)
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 64
Bus: primary=00, secondary=02, subordinate=03, sec-latency=69
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f2000000-f21fffff
Prefetchable memory behind bridge: fc100000-fc1fffff
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
01:05.0 VGA compatible controller: nVidia Corporation NV20 [GeForce3] (rev a3)
(prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc. AGP-V8200 DDR
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Region 2: Memory at fc000000 (32-bit, prefetchable) [size=512K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=31 SBA- 64bit- FW- Rate=x1,x2,x4
Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
02:04.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin A routed to IRQ 5
Region 0: Memory at f2001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0035
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f2002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:04.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Adaptec: Unknown device 00e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 132 (4000ns min, 8500ns max), cache line size 10
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f2003000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture
(rev 11)
Subsystem: ATI Technologies Inc: Unknown device 0001
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 132 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc100000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:05.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev
11)
Subsystem: ATI Technologies Inc TV-Wonder
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc101000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:06.0 PCI bridge: Hint Corp HB1-SE33 PCI-PCI Bridge (rev 13) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64, cache line size 10
Bus: primary=02, secondary=03, subordinate=03, sec-latency=69
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: f2100000-f21fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [90] #06 [0000]
Capabilities: [a0] Vital Product Data
02:07.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 04)
Subsystem: Creative Labs CT4850 SBLive! Value
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 2080 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:07.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev
01)
Subsystem: Creative Labs Gameport Joystick
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at 20a0 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:08.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev
78)
Subsystem: Tyan Computer: Unknown device 2466
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 80 (2500ns min, 2500ns max), cache line size 10
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 2000 [size=128]
Region 1: Memory at f2003400 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:08.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0235
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f2104000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:08.1 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0235
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), cache line size 10
Interrupt: pin B routed to IRQ 9
Region 0: Memory at f2105000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:08.2 USB Controller: NEC Corporation USB 2.0 (rev 02) (prog-if 20 [EHCI])
Subsystem: Adaptec: Unknown device 02e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 132 (4000ns min, 8500ns max), cache line size 10
Interrupt: pin C routed to IRQ 5
Region 0: Memory at f2106800 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
03:0b.0 FireWire (IEEE 1394): Texas Instruments TSB12LV26 IEEE-1394 Controller
(Link) (prog-if 10 [OHCI])
Subsystem: Texas Instruments: Unknown device 8010
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 64 (750ns min, 1000ns max), cache line size 10
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f2106000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at f2100000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
[root@angel root]# cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: QUANTUM Model: ATLAS10K2-TY184L Rev: DDD6
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: QUANTUM Model: ATLAS10K2-TY184L Rev: DDD6
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: QUANTUM Model: ATLAS 10K 9WLS Rev: UCH0
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: PIONEER Model: DVD-ROM DVD-305 Rev: 1.03
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: PLEXTOR Model: CD-R PX-W1210S Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: QUANTUM Model: ATLAS10K3_36_WLS Rev: 020W
Type: Direct-Access ANSI SCSI revision: 03
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: Maxtor 4 Model: G120J6 Rev: 0811
Type: Direct-Access ANSI SCSI revision: 02
[root@angel root]# cat /proc/bus/usb/devices
T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.20-pre11 ehci-hcd
S: Product=NEC Corporation USB 2.0 (#2)
S: SerialNumber=03:08.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=06 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05e3 ProdID=0702 Rev= 0.02
S: Product=USB TO IDE
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 96mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5
B: Alloc= 0/800 us ( 0%), #Int= 1, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.04
S: Manufacturer=Linux 2.4.20-pre11 ehci-hcd
S: Product=NEC Corporation USB 2.0
S: SerialNumber=02:04.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=05 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 4
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=050d ProdID=0224 Rev= 1.00
S: Manufacturer=NEC Corporation
S: Product=USB2.0 Hub Controller
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=256ms
T: Bus=05 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=1005 Rev= 0.00
S: Manufacturer=Hewlett-Packard
S: Product=HP Scanjet 5400C Series
S: SerialNumber=CN1771E0XRST
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 48mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=10ms
T: Bus=05 Lev=02 Prnt=02 Port=03 Cnt=02 Dev#= 4 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c002 Rev= 1.20
S: Manufacturer=Logitech
S: Product=USB-PS/2 Mouse M-BA47
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f8904000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f88f1000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f88de000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=f88dc000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
-Angel
-------------------------------------------------------
This sf.net email is sponsored by: Influence the future
of Java(TM) technology. Join the Java Community
Process(SM) (JCP(SM)) program now.
http://ads.sourceforge.net/cgi-bin/redirect.pl?sunm0004en
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
