Hello Eugene,

On Sun, 8 Feb 2004 13:57:05 +0000 Eugene Nine <[EMAIL PROTECTED]> wrote:

> On Sunday 08 February 2004 06:01 pm, wwp wrote:
> > Hello Eugene,
> >
> > On Sun, 8 Feb 2004 10:49:37 +0000 Eugene Nine <[EMAIL PROTECTED]> wrote:
> > > I'm not sure how to tell the version of pcmcia-cs.  Its whataver slack9.1
> > > includes, the only thing I have done is compile a kernel with scsi
> > > support and usb debug to try to determine why I can't talk to a USB cell
> > > phone.
> >
> > Well, I don't know much about slack internal stuff. The only way to get
> > information would be to look at the system log when you plug the pcmcia car
> > in. Or to know how slack is built over pcmcia support (pcmcia-cs or kernel
> > modules only).
> >
> > Could you eventually provide me privately an excerpt of your system log
> > (probably /var/log/message or so) that corresponds to the plugging in of
> > your cardbus? This would help me figuring out how it can work for you and
> > mayb how I can make it work for me.
> >
> Looks like there is a bunch of extra in the log, seems the hotplug is trying 
> to load a bunch of stuff.

Hmm many things related to the USB host detection itself, but not so much to
the cardbus detection.. Thanx for this Eugene, I will ask for pcmcia
developers' help!


> Feb  8 13:55:08 c400 cardmgr[60]: socket 0: CardBus hotplug device
> Feb  8 13:55:08 c400 kernel: ehci_hcd 03:00.2: PCI device 1033:00e0
> Feb  8 13:55:08 c400 kernel: ehci_hcd 03:00.2: irq 11, pci mem e8aea000
> Feb  8 13:55:08 c400 kernel: usb.c: new USB bus registered, assigned bus 
> number 2
> Feb  8 13:55:08 c400 kernel: ehci_hcd 03:00.2: USB 2.0 enabled, EHCI 1.00, 
> driver 2003-Jun-19/2.4
> Feb  8 13:55:08 c400 kernel: hub.c: USB hub found
> Feb  8 13:55:08 c400 kernel: hub.c: 5 ports detected
> Feb  8 13:55:08 c400 pci.agent[1376]: missing kernel or user mode driver 
> ehci-hcd
> Feb  8 13:55:08 c400 kernel: usb-ohci.c: USB OHCI at membase 0xe8af2000, IRQ 
> 11
> Feb  8 13:55:08 c400 kernel: usb-ohci.c: usb-03:00.0, PCI device 1033:0035
> Feb  8 13:55:08 c400 kernel: usb.c: new USB bus registered, assigned bus 
> number 3
> Feb  8 13:55:08 c400 pci.agent[1374]: missing kernel or user mode driver 
> prism2_pci
> Feb  8 13:55:08 c400 kernel: hub.c: USB hub found
> Feb  8 13:55:08 c400 kernel: hub.c: 3 ports detected
> Feb  8 13:55:08 c400 kernel: usb-ohci.c: USB OHCI at membase 0xe8af7000, IRQ 
> 11
> Feb  8 13:55:08 c400 kernel: usb-ohci.c: usb-03:00.1, PCI device 1033:0035
> Feb  8 13:55:08 c400 kernel: usb.c: new USB bus registered, assigned bus 
> number 4
> Feb  8 13:55:08 c400 kernel: hub.c: USB hub found
> Feb  8 13:55:08 c400 kernel: hub.c: 2 ports detected
> Feb  8 13:55:08 c400 pci.agent[1382]: missing kernel or user mode driver 
> ehci-hcd
> Feb  8 13:55:08 c400 pci.agent[1382]: missing kernel or user mode driver 
> usb-ohci
> Feb  8 13:55:08 c400 pci.agent[1382]: missing kernel or user mode driver 
> prism2_pci
> Feb  8 13:55:08 c400 pci.agent[1376]: missing kernel or user mode driver 
> prism2_pci
> Feb  8 13:55:08 c400 pci.agent[1382]: ... can't load module orinoco_pci
> Feb  8 13:55:08 c400 pci.agent[1382]: missing kernel or user mode driver 
> orinoco_pci
> Feb  8 13:55:08 c400 pci.agent[1382]: missing kernel or user mode driver 
> yenta_socket
> Feb  8 13:55:08 c400 pci.agent[1376]: ... can't load module orinoco_pci
> Feb  8 13:55:08 c400 pci.agent[1382]: missing kernel or user mode driver 3c59x
> Feb  8 13:55:08 c400 pci.agent[1382]: missing kernel or user mode driver 
> snd-intel8x0
> Feb  8 13:55:08 c400 pci.agent[1376]: missing kernel or user mode driver 
> orinoco_pci


Regards,

-- 
wwp


-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to