On Sun, 17 Oct 2004, Mike Yates wrote: > It still won't register the 250GB drive.
> Then I plugged in the Freecom:- > > usb 2-1: new full speed USB device using address 2 > uhci_hcd 0000:00:0d.0: uhci_result_control: failed with status 440000 > [cbc46240] link (0bc461e2) element (0bc44040) > 0: [cbc44040] link (0bc44080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 > DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=0f2744a0) > 1: [cbc44080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 > EndPt=0 Dev=0, PID=69(IN) (buf=00000000) These errors crop up quite often. They indicate that either the drive isn't working according to spec or else the UHCI controller is out-of-spec. Hard to say which, but it doesn't much matter... I'll try to get hold of the changes to the EHCI driver introduced in the -mm release. Or Eero, since you already have both the vanilla -rc4 and -mm kernels, you could find the differences yourself. The files of interest are driver/usb/host/ehci*.[ch] -- and if you feel like experimenting you can simply take the -mm versions of the those files, put them into the -rc4 source directory, and see what happens when you build and run them! Alan Stern ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
