On Sun, 13 Jan 2002 21:40,[EMAIL PROTECTED] scribed: > Skippy, > > This is from my son's box that uses SuSE 7.3 Pro, KDE 2.2.1 Kernel > 2.4.10-4GB. I DO NOT use hdx=ide-scsi. I have a dvd and a cdrom > on the box. However, both are eide/atapi: > > From /etc/fstab: > /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0 > /dev/dvd /media/dvd auto ro,noauto,user,exec 0 0 > > from /dev > > /dev/hdb->/dev/cdrom > /dev/hdd->/dev/dvd > > I have no ide-scsi lines in my lilo.conf. Both work flawlessly. > As you may recall, you sent me some good advice on xine when I > set this up. I can see movies use either as a cdrom and have > no srx, scdx, or scsi-emulation setup. I dunno if this helps > you, but it works well under my suse 7.3 setup. Good luck! > > Best regards,
Keith, Do you have a burner? When you call cdrecord --scanbus are they 'seen' ?If not then we are different in that I DO need them to be seen as scsi devices so as I can burn DAO. From what you say above you have 2 readers and no recorder, this so? -- Keith Antoine aka 'skippy' 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage _______________________________________________ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
