Have you tried updating the BIOS? On Thu, May 7, 2015 at 11:13 AM Wilson, Patrick (Pat) < [email protected]> wrote:
> What mode for the SATA in the BIOS? > > > > *Pat Wilson* > > > > CONFIDENTIALITY NOTICE: This e-mail is intended solely for the person or > entity to which it is addressed and may contain confidential and/or > privileged information. Any review, dissemination, copying, printing, or > other use of the e-mail by persons or entities other than the addressee is > prohibited. If you have received this e-mail in error, please contact the > sender or send an e-mail to the sender and immediately delete the material > from your computer. Thank you. > > > > P Please consider the environment before printing this e-mail, and do so > only if absolutely necessary > > > > *From:* [email protected] [mailto: > [email protected]] *On Behalf Of *Murray, Mike > *Sent:* Thursday, May 7, 2015 8:07 AM > > > *To:* [email protected] > *Subject:* RE: [mssms] OSD - Computer hangs on format and partition step > > > > We’ve imaged other E5540’s successfully. > > > > *From:* [email protected] [ > mailto:[email protected] <[email protected]>] *On > Behalf Of *John Hamilton > *Sent:* Wednesday, May 6, 2015 4:31 PM > *To:* <[email protected]> > *Subject:* Re: [mssms] OSD - Computer hangs on format and partition step > > > > Just one particular e5440? Are other e5440s imaging ok? > > Regards, > > > > *John Hamilton* > > System Administrator > FTS International > 777 Main Street, Suite 2800 > Fort Worth, Texas 76102 > Direct: 817.339.3549 > > Mobile: 817.682.0140 > > *[email protected] <[email protected]>om* > > Sent from my iPhone > > > On May 6, 2015, at 5:27 PM, Stephen Leuthold <[email protected]> > wrote: > > What cmd does diskpart hang at? > > Have you tried this first: > Diskpart > Select disk 0 > Clean > ? > > > -Stephen > > On May 6, 2015, at 3:25 PM, Murray, Mike <[email protected]> wrote: > > > > We have a Dell Latitude E5540 that refuses to get through the format and > partition step. It just hangs. If I hit F8 and try to run diskpart from a > command prompt, it also hangs. > > > > We've replaced the hard drive, no luck. Formatted the drive to be safe, > no luck. We've imaged this model before with no issue. Any ideas? > > > > > > Best Regards, > > > > Mike Murray > > Desktop Management Coordinator - IT Support Services > > California State University, Chico > > 530.898.4357 > > [email protected]<mailto:[email protected] <[email protected]>> > > > > > > > > > > <diskpart hang.jpg> > > > > > ------------------------------ > > > CONFIDENTIALITY NOTICE: This email message and any attachments hereto are > intended only for use by the addressee(s) named herein and may contain > information which is legally privileged, confidential and/or exempt from > disclosure under applicable law. If you are not the intended recipient, or > an authorized representative of the intended recipient, of this email > message, you are hereby notified that any review, dissemination, > distribution, copying, or use (including any reliance thereon) of this > email message, and/or any attachment hereto, is strictly prohibited. > > Although this transmission and any attachments are believed to be free of > any virus or other defect that might affect any computer system into which > it is received and opened, it is the responsibility of the recipient to > ensure that it is free from virus or other defect and no responsibility is > accepted by the sending company, its subsidiaries and affiliates, as > applicable, for any loss or damage arising in any way from its use. > > If you have received this email message in error, please immediately > notify the sender by return email and permanently delete from your system, > the original and any copies of this email and any attachments hereto and > any printout hereof. Unauthorized interception of this email is a violation > of federal criminal law. > > > > >
