On 01/28/2014 12:27 PM, Tobiasz Karoń wrote: > Instead of additional LEDs I have a little different concept: > > I could do graphics for such "lamp buttons" that would be the size of > current buttons, but would replace them. > They could be used just for Solo/Mute buttons both in the Project > Editor and Mixer. > > These could be 22x22 (about - correct me!) graphics. In the Project > Editor they'd be side by side, in the Mixer they'd be vertically in > one column (Mute on top or Solo on top?).
22 is way, way too large. The current leds are 15 pixels wide (IIRC) and that's about as large as they should be. > I'd just need to know the colors for lit Mute and lit Solo (Mute i > guess would be red, and solo - orange?) > The off states would be gray. > > Please note that this concept inverts the mute button state in > relation to 0.4.15 - previously it was the "ON" button, now it's the > "OFF" button, so inverting this behavior and automation interpreting > in older projects might be needed. But this is probably already done > since the button is already a mute button - i.e when it's enabled, the > sound is disabled - in 0.4.15 when this was enabled, the sound was > enabled too. This is getting so far into new functionality territory, that I don't think this is something that we should even consider until after the next release is out. Right now we should concentrate on bugfixes and polishing the RC for release, not new functionality. There's all kinds of things to consider here - breaking existing workflows, backwards-compatibility (if you load an old track, will all the channels be muted?) and so on. This is really not something I'm comfortable starting at this stage. We can start discussions about the mute/solo leds again after 1.0.0 is out. For now, I think it's best we stick with the current implementation. ------------------------------------------------------------------------------ WatchGuard Dimension instantly turns raw network data into actionable security intelligence. It gives you real-time visual feedback on key security issues and trends. Skip the complicated setup - simply import a virtual appliance and go from zero to informed in seconds. http://pubads.g.doubleclick.net/gampad/clk?id=123612991&iu=/4140/ostg.clktrk _______________________________________________ LMMS-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/lmms-devel
