On 24 Jun 2003 at 15:26, Josiah Ritchie wrote: > >3.) The Flash ROM can be programmed while mounted on the card. An eprom > >programmer is not needed. Use the Linux program 3c90xutil/bromutil for this. > >You will find it in the etherboot package. > > Can I program an ne2000 rom in a 3C90x > slot? If that's the case I could build my own ROM burner. Very cool!! I'm > hoping I didn't misread this point.
You cannot burn EPROMS with a NIC because the card does not supply the voltage needed for the programming process of the eprom. flash memory (e.g. AT29C512 or AT29C010) can be programmed onboard of the 3COM 905b-TX NIC. So you have to prove if flash memory can be used with your NICs, in case of any ne2000 cards i guess you can not. cu Kai Wollweber -- IGS Eckernf�rde http://www.wollw.de ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
