>You cannot burn EPROMS with a NIC because the card does not supply the voltage >needed for the programming process of the eprom. > >flash memory (e.g. AT29C512 or AT29C010) can be programmed onboard of the 3COM >905b-TX NIC. So you have to prove if flash memory can be used with your NICs, >in case of any ne2000 cards i guess you can not.
I was afraid that was too good to be true. With the 3cs it isn't burning then, just programming? I guess I don't really understand the difference. ------------------------------------------------------- This SF.Net email is sponsored by: INetU Attention Web Developers & Consultants: Become An INetU Hosting Partner. Refer Dedicated Servers. We Manage Them. You Get 10% Monthly Commission! INetU Dedicated Managed Hosting http://www.inetu.net/partner/index.php _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
