On Sun, 2004-04-11 at 20:04, [EMAIL PROTECTED] wrote: > A bit more on the XF86Config Keyboard errors > I'm seeing at boot up on the client machines: > [SNIP] > Any other clues about how to proceed here? > > Thanks again for your time. > > -- Hugh Esco I am surprised Hesco All that Jam has guided you with is right there on ltsp.org documentation. If you would have taken a bit of initiative and read the documents client boot up would have been a cinche. Mode line setup is tricky and you would be better off starting with X_MODE_0 = 600x480 In your lts.conf file. Incidentally lot of information in lts.conf.readme in the same directory. Try reading and going step by step. Sorry for the rant. -- Sudev Barar Learning Linux
------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.freenode.net
