> if you want to use rj45 -> db25 hoods, you should check out a cable
like https://www.amazon.com/gp/product/B078PT5N24
<https://www.amazon.com/gp/product/B078PT5N24> which will just plug into
an android device with usb c port and give you a rj45 end to plug into
> --francois
Then you still have to cut off the rj45 end and solder on a db25.
It also assumes the android device has a usb-c jack.
I made an equally unsafe assumption that the android device has micro-usb.
If you're assuming usb-c, you could combine the OTG cable and usb-serial
in one with this:
https://www.amazon.com/dp/B074VM88G1
Then you just need the serial cable I showed, or the two mini adapters
in the mComm manual.
I guess the advantage with the usb-c adapter is, if you have both a new
phone and a new laptop, then they both have the same usb-c jacks, so the
same adapter works on both without an extra OTG cable for the phone.
--
bkw
