Sag ich Dir nich writes: > I need to know the ip adress of my beaglebone so i can connect it to my pc > via ssh but when i write ifconfig in the terminal i get no ethernet ip > adress: > > machinekit@beaglebone:~$ ifconfig > eth0 Link encap:Ethernet HWaddr a0:f6:fd:4b:9c:97 > inet6 addr: fe80::a2f6:fdff:fe4b:9c97/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:316 errors:0 dropped:0 overruns:0 frame:0 > TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:77089 (75.2 KiB) TX bytes:13100 (12.7 KiB) > Interrupt:40 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > usb0 Link encap:Ethernet HWaddr a0:f6:fd:4b:9c:99 > inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 > UP BROADCAST MULTICAST MTU:1500 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > do i have to install something?
Try ifdown eth0 ifup eth0 or sudo dhclient eth0 Btw. ifconfig is deprecated and I recommand to use ip instead (http://serverfault.com/questions/458628/should-i-quit-using-ifconfig) ip a would be the new command to show the IP addresses, it's even shorter to type -- Alexander -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
