Thank you very much Jubeyer. I will work on that. Best Regards Fouad hasan
On Tue, Mar 17, 2020 at 1:28 PM Jubeyer Rahman <[email protected]> wrote: > Hi, > > The information you're looking for aren't in the pwb (power world binary > file); you need to take a look at the paper published by Adam Birchfield > (look at page 5); > https://scholarspace.manoa.hawaii.edu/bitstream/10125/41535/paper0386.pdf > > And you will not get these information directly (suitable to the capacity > of your generator) and in many cases you have to assume, that's why the > DISPA-SET dataset might give you some workable data. > > > https://github.com/energy-modelling-toolkit/Dispa-SET/tree/master/Database/PowerPlants > > > Hope this helps. > > Regards, > Jubeyer > > > > On Tue, Mar 17, 2020 at 12:49 PM Meraj Fouad <[email protected]> wrote: > >> Hi Jubayer. >> Thank you for the response. >> >> Would you kindly provide a link to that data set. I have found the >> following link for TEXAS 2000 bus system. But It does not contain the >> Minimum on/off time constraints of the generators. Any idea about this >> Minimum on/off time constraints? >> >> Best Regards >> >> https://electricgrids.engr.tamu.edu/electric-grid-test-cases/ >> >> On Tue, Mar 17, 2020 at 12:15 PM Jubeyer Rahman <[email protected]> >> wrote: >> >>> >>> Hi Fouad, >>> You can take a look at the Texas-2000 bus system data repository. >>> >>> Another one could be the DISPA-SET repository. >>> >>> Regards, >>> Jubeyer >>> >>> >>> >>> On Tue, Mar 17, 2020 at 10:42 AM Meraj Fouad <[email protected]> wrote: >>> >>>> Dear MATPOWER Community, >>>> >>>> I want to run Unit commitment (SCUC) for larger system(>1000). Does >>>> anyone have data set for this purpose. I need a system with Min on/off >>>> times, Ramp up/down limit and cost function. >>>> >>>> Best Regards >>>> Fouad Hasan >>>> >>>
