I recently asked similar questions to the Texas A&M folks, they pointed me to one of their publications: [1] T. Xu, A. B. Birchfield, K. M. Gegner, K. S. Shetye, and T. J. Overbye, “Application of large-scale synthetic power system models for energy economic studies,” in *Proceedings of the 50th Hawaii International Conference on System Sciences*, 2017.
It provides a table of reasonable ranges for these parameters you are looking for. On Tue, Mar 17, 2020 at 2:40 PM Hasan Fouad <[email protected]> wrote: > Thank you very much Jubeyer. I will work on that. > > Best Regards > Fouad hasan > > On Tue, Mar 17, 2020 at 1:28 PM Jubeyer Rahman <[email protected]> wrote: > >> Hi, >> >> The information you're looking for aren't in the pwb (power world binary >> file); you need to take a look at the paper published by Adam Birchfield >> (look at page 5); >> https://scholarspace.manoa.hawaii.edu/bitstream/10125/41535/paper0386.pdf >> >> >> And you will not get these information directly (suitable to the capacity >> of your generator) and in many cases you have to assume, that's why the >> DISPA-SET dataset might give you some workable data. >> >> >> https://github.com/energy-modelling-toolkit/Dispa-SET/tree/master/Database/PowerPlants >> >> >> Hope this helps. >> >> Regards, >> Jubeyer >> >> >> >> On Tue, Mar 17, 2020 at 12:49 PM Meraj Fouad <[email protected]> wrote: >> >>> Hi Jubayer. >>> Thank you for the response. >>> >>> Would you kindly provide a link to that data set. I have found the >>> following link for TEXAS 2000 bus system. But It does not contain the >>> Minimum on/off time constraints of the generators. Any idea about this >>> Minimum on/off time constraints? >>> >>> Best Regards >>> >>> https://electricgrids.engr.tamu.edu/electric-grid-test-cases/ >>> >>> On Tue, Mar 17, 2020 at 12:15 PM Jubeyer Rahman <[email protected]> >>> wrote: >>> >>>> >>>> Hi Fouad, >>>> You can take a look at the Texas-2000 bus system data repository. >>>> >>>> Another one could be the DISPA-SET repository. >>>> >>>> Regards, >>>> Jubeyer >>>> >>>> >>>> >>>> On Tue, Mar 17, 2020 at 10:42 AM Meraj Fouad <[email protected]> >>>> wrote: >>>> >>>>> Dear MATPOWER Community, >>>>> >>>>> I want to run Unit commitment (SCUC) for larger system(>1000). Does >>>>> anyone have data set for this purpose. I need a system with Min on/off >>>>> times, Ramp up/down limit and cost function. >>>>> >>>>> Best Regards >>>>> Fouad Hasan >>>>> >>>>
