Yes, I now it now. It would be very useful to have a single line of information, under the Capture Agent installation, saying that this installation is not needed for the MA device. And a very short instruction about the MA setup. It would save lots of time for newcomers.
Leslaw On Sep 27, 2011, at 5:23 PM, Greg Logan wrote: > On 11-09-27 02:39 AM, Dr Leslaw Zieleznik wrote: >> Hi Kristof, >> >> Which driver have you selected during the MA installation? >> There are on the list only the Epiphan vga2usb devices, plus two other >> options: enter URL and 'don't need driver'. >> Should I enter the MA URL? > > The ECA and the normal Matterhorn CA are two entirely separate pieces of > equipment. You won't be prompted for a driver when setting up an ECA > because you won't be installing anything... > > G > >> Les >> >> >> >> On Sep 27, 2011, at 7:50 AM, Kristof Keppens wrote: >> >>> Where did you get this firmware from? I try to download it from the epiphan >>> website ( http://epiphan.com/downloads/firmware/Davinci_Matterhorn ) and >>> keep getting the 2.2.0c version. >>> >>> On 09/27/2011 08:40 AM, Dr Leslaw Zieleznik wrote: >>>> >>>> I have just received one with the 2.2.0e on it, which logically should be >>>> a never version than .0d ? >>>> >>>> Leslaw >>>> >>>> On Sep 27, 2011, at 6:27 AM, Kristof Keppens wrote: >>>> >>>>> Is there any info available on when we can expect the 2.2.0d firmware on >>>>> the epiphan site. Without it our epiphan capture appliances are useless >>>>> and we would very much like to start testing them with our opencast 1.2 >>>>> server. >>>>> >>>>> Thanks >>>>> >>>>> Kristof >>>>> >>>>> On 09/22/2011 05:40 PM, Greg Logan wrote: >>>>>> On 11-09-22 12:43 AM, Kristof Keppens wrote: >>>>>>> I've just tried the upgrade after disabling most features and setting >>>>>>> streaming settings to the fastest + without a dvi connection active and >>>>>>> now the upgrade succeeded. Thanks for the help. >>>>>>> >>>>>>> However after the update the device is still unable to register itself >>>>>>> with the server. It seems that no request arrive at the server. Should >>>>>>> we wait for the 2.2.0d firmware for this to work? >>>>>> >>>>>> It won't work without it unfortunately. I'm surprised I haven't seen >>>>>> more complains on list, this bug affects (as far as I know) all recent >>>>>> versions of the firmware and I only recently caught it. >>>>>> >>>>>>> I've one more question about the appliance, there is the menu >>>>>>> maintenance with settings for the maintenance server. What does this do >>>>>>> and should we enable it ? >>>>>> >>>>>> This is an Epiphan function, but I believe it allows remote support of >>>>>> the device from Epiphan's tech support staff. I've left mine enabled >>>>>> since it doesn't seem to hurt anything. >>>>>> >>>>>>> Also is there any way to monitor these devices ( through zabbix or >>>>>>> nagios )? >>>>>> >>>>>> Not yet. This has been requested, but I have not seen any movement in >>>>>> that regard. >>>>>> >>>>>> >>>> _______________________________________________ >>>> Matterhorn-users mailing list >>>> [email protected] >>>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >>> >>> _______________________________________________ >>> Matterhorn-users mailing list >>> [email protected] >>> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> >> >> _______________________________________________ >> Matterhorn-users mailing list >> [email protected] >> http://lists.opencastproject.org/mailman/listinfo/matterhorn-users >> > > > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
