I don't mean to thread-jack, but I am having similar issues with an ECA. I am a new Matterhorn user who is also having issues with registering the ECA on 1.2 core. My ECA is showing 2.2.0d firmware. I plug in admin/opencast for the username and password and point the URL to our Matterhorn server but it never registers. If I run a Wireshark capture, I am seeing the same "401 Incorrect Response" as another user who posted earlier in the week.
What am I doing wrong? We would like to get this up and running. Thanks, Eric Sweetman Director of Technology Troy City Schools [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Greg Logan Sent: Wednesday, September 21, 2011 11:52 AM To: [email protected] Subject: Re: [Matterhorn-users] Epiphan Capture Appliance On 11-09-20 11:13 PM, Kristof Keppens wrote: > Hi, > > We recently bought 2 Epiphan Capture Appliances to use with our new > 1.2 servers. Unfortunately we're experiencing some issues with the > configuration. I first tried to configure the ECA but it seemed no > requests ever reached the server. After saving the matterhorn config > form the page also seemed to hang, just kept loading. When then going > back to admin and matterhorn page the settings seemed to be saved but > no message of that appeared and also the device never registered on > the server. The stock firmware has a bug that prevents it from properly registering with a 1.2 core. I've since corrected it, but it does require an upgrade to the newest (2.2.0d, should be out this week hopefully) firmware. > I then noticed that there is a newer firmware, still on 2.2.0rc1 so > decided to try the upgrade first. On ECA 1 the upload succeeded but > got an internal server error. Now all admin pages on that ECA give an > internal server error. > On ECA 2 the upload failed with "Error uploading firmware file 3". The devices have small amounts of memory inside and can misbehave sometimes when they need to upgrade their firmware. I would remove power from both units for a minute or two, then restore power and immediately try and upgrade again. If that still doesn't work then please let us know and we can look at alternatives. G > Can someone assist me in either the firmware upgrade or the matterhorn > config ? > > Thanks a lot! > > Kristof Keppens > _______________________________________________ > Matterhorn-users mailing list > [email protected] > http://lists.opencastproject.org/mailman/listinfo/matterhorn-users _______________________________________________ Matterhorn-users mailing list [email protected] http://lists.opencastproject.org/mailman/listinfo/matterhorn-users
