After importing (without changing anything) into VB, the VM doesn't start without setting the processor PAE/NX setting.
Even with that, ubuntu boots but stops loading after a few seconds, precisely when "loading initial ramdisk". Any hint? Il giorno sabato 5 gennaio 2013 05:43:26 UTC+1, Roberto Rosario ha scritto: > > Instead of a virtual disk image there is now a virtual appliance image for > Mayan. The new image can be found at the bottom of the downloads section > of the website or by this direct link: > http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13.ova. > > The final file came much smaller too: 700MB uncompressed appliance image > vs. 1GB compressed disk image, and setting it up is a breeze, just import > and boot it up. There is also a small update and the IP address is now > shown on the login prompt so no longer is login on needed to get the IP > address of the appliance. Thanks for MGinstruct for the heads up on > virtual appliances. > VirtualBox appliance image > > This appliance file contains Ubuntu 12.10 with *Mayan EDMS*, LibreOffice, > Tesseract, Unpaper and everything you need installed and ready to be used. > The file is almost 700MB in size. Just download, import > into VirtualBox and start it up, the IP address will be shown after it is > up and running in the login prompt. > Download link: *→2013-01-04 Direct download SHA1 > checksum > 83fe17bee3e0700302a50e03fefd83f89cfc9a45<http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13.ova> > * > > On Monday, December 24, 2012 6:29:31 PM UTC-4, Roberto Rosario wrote: >> >> I've finished uploading an Ubuntu server 12.10 VirtualBox disk image with >> Mayan 0.13 working with Apache 2, SQLite, tesseract, LibreOffice, Unpaper >> and graphicsmagick. Until the website is updated, this is the link: >> http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13%20(Ubuntu%2012.10,%20Apache,%20SQLite).vdi.zip<http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13%20%28Ubuntu%2012.10,%20Apache,%20SQLite%29.vdi.zip> >> >> The file is almost 1GB compressed and about 3GB uncompressed. >> >> Download, unzip and create a virtual machine with this disk image. The >> virtual machine must be setup with it's network card in 'Bridge' mode so >> that Mayan may be accessible. >> >> Boot the virtual machine and enter the credentials: >> >> Username: mayan >> Password: edms >> >> to get the IP address. >> >> Tips, fixes, suggestions as always are most welcome. >> >> --Roberto >> >> -- --- You received this message because you are subscribed to the Google Groups "Mayan EDMS" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/groups/opt_out.
