May I get detailed instructions? I have run it on VirtualBox and I keep wondering how to get the IP address. I tried to type ifconfig but when I tried to access IP Adress given on my host web browser, it was unaccessable.
Pardon for my ignorance. Thanks. On Thursday, January 3, 2013 1:23:01 PM UTC+7, Roberto Rosario wrote: > > Revised instructions for using the VirtualBox disk image, thanks to Chris > Patterson: > > - Download, unzip and create a virtual machine with this disk image. > - The virtual machine must be setup with it’s network card in > ‘Bridge’ mode so that *Mayan EDMS* may be accessible. > - Use: “Linux, 64bit Ubuntu” when setting up the virtual machine > - Boot the virtual machine, login (Username: mayan & Password: edms) > and type: > - sudo rm /etc/udev/rules.d/70-persistent-net.rules && sudo reboot > (password is edms) > - After reboot login again to get the IP address. > - Browse to the IP address of the virtual machine from a web browser. > > > > On Monday, December 24, 2012 6:29:31 PM UTC-4, Roberto Rosario wrote: >> >> I've finished uploading an Ubuntu server 12.10 VirtualBox disk image with >> Mayan 0.13 working with Apache 2, SQLite, tesseract, LibreOffice, Unpaper >> and graphicsmagick. Until the website is updated, this is the link: >> http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13%20(Ubuntu%2012.10,%20Apache,%20SQLite).vdi.zip<http://www.mayan-edms.com/downloads/Mayan%20EDMS%20v0.13%20%28Ubuntu%2012.10,%20Apache,%20SQLite%29.vdi.zip> >> >> The file is almost 1GB compressed and about 3GB uncompressed. >> >> Download, unzip and create a virtual machine with this disk image. The >> virtual machine must be setup with it's network card in 'Bridge' mode so >> that Mayan may be accessible. >> >> Boot the virtual machine and enter the credentials: >> >> Username: mayan >> Password: edms >> >> to get the IP address. >> >> Tips, fixes, suggestions as always are most welcome. >> >> --Roberto >> >> --
