FJ Man,
If you pull the diff make sure you put the U shaped shims back in when you
replace it. If you don't it will make the job harder next time.
Trev
-=-=-=-=-=-==-=-=-=-
Topic: changing a diff
=================
Date: Mon, 10 Apr 2000 16:50:50 +1000
From: Ignacio Sandejas <[EMAIL PROTECTED]>
----------------------------------------
Breaker bar + single hex socket should do it
If not a compressor and a rattle gun would do the trick!!!
-----Original Message-----
From: FJ MAN [mailto:[EMAIL PROTECTED]]
Sent: Monday, April 10, 2000 16:23
To: [EMAIL PROTECTED]
Subject: changing a diff
gday fellas okay the bolts to the rear cross member what size and best tool
to use i have a socket and a driver but it doesnt wanna budge at the moment
and the rear bolts also seem pretty tight any one recommend a tool to use
for all the bolts i dont mind buying anything to make it easy hey haha its
just too fukn tihgt at the moment cheers fellas
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
