Wayne,
Hehehe, remember there are ladies present (:-
Back to the bar, sound like you've measured the wrong holes as on
the bar the distance between the holes are 80 mm (R160 & R180). To
tell which diff you have you measure the distance between the
"bolts" on the bottom of the alloy cover on the back of the diff
itself just below the oil drain plug.
You shouldn't have trouble getting the correct bar, there must be
heaps of dero 180B's in Bendigo but let us know if you can't find
one and i'll see if i can get one down to you.
regards
Terry
Wayne wrote:
>
>
> ----- Original Message -----
> From: Terry & Heather
> To: [EMAIL PROTECTED]
> Sent: Thursday, April 20, 2000 2:08 AM
> Subject: Re: DATSUN - That spring again...
> Terry, Just measured my bar and it is 80mm. (someone
> may laugh at that, but I don't care).
> I'll check the wreckers next time i'm out tht way.
> They cleaned out all their crap a few weeks ago.
> $10 entry to the yard, all you can carry. I didn't
> find out until after it happened, but one of my mates
> got an RX4 bumper, 2 leaf spring sets (rx4) and a pair
> of volvo 4spot callipers.(He was in a hurry).Not too
> bad for 10 bucks.
> How well do street tyres handle the punishment of
> (not too serious) circuit racing (mainly practice) &
> motorkarna events ?
> I ask this as I recently brought 4 185x60x14 Dunlop
> Formula W10's , all with atleast 50% tread, but the
> shoulders down to the
> indicators on 3 of them. (all for $20).
> -Wayne.
> P.S. Don't want to sound like a brown tounge, but I
> hope everyone has a safe and happy easter.
>
> Remember: Too much chocolate=Extra weight=Decreased
> power/weight ratio.
> Wayne,
> The bar you have isn't of a Skyline that's for sure as
> they have Type 1 (refer earlier post). If the diff is
> of a Skyline it will be a R180 so to check this out
> measure the distance between the bottom bolts on the
> rear cover and see if they are spaced 80 mm apart, if
> they are not let me know what this measurement is. I'd
> be inclined to try and find another bar as i don't
> like that one at all. The bars of the
> 510/610/240K/Skyline C210 are interchangeable and a
> replacement should only cost $5, just check to see if
> the bushes are in good shape on your selection. I'd be
> surprised if the wreckers at Epson don't have a box of
> them lying about.
>
>
>
>
> -
> membersozdat-------------------------------------------------------
>
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.datascribe.com.au/ozdatonline/index.htm
> http://www.datascribe.com.au/ozdatonline/listindex.html
> -------------------------------------------------------
> -------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.datascribe.com.au/ozdatonline/index.htm
http://www.datascribe.com.au/ozdatonline/listindex.html
---------------------------------------------------------------------
