Paddy,
Were your old calipers the sort that took the squarish pads (sumitomo
calipers) pads part number db86? As I think I will have to look into these
babies.
Ryan
>From: "Paddy McMillan" <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject: Re: hilux calipers and 200b struts
>Date: Tue, 10 Oct 2000 19:04:07 +0930
>
> ok i bought the calipers today, and they bolted on to the 200b struts
>and
>fit perfectly over the discs, outer edge of disc just above level with
>outer
>edge of the pad(0.5-1mm), inside edge of pad slightly further towards
>center
>of disc(~5-10mm) than the 200b pads, had to use the hilux bolts as the 200b
>were a little short on thread, but that was all. damn easy conversion for
>on
>a 200b, havent fitted the struts to me 510 yet but that will be done the
>next few days.
>the calipers were off an 8/81 hilux 4WD, they have 2 small and 2 larger
>pistons
>the struts were off a 79 200b, 253mm discs not the db1091 pad type ones.
>the struts will need to be swaped on the 510, 13" wheels may JUST fit
>depending on the wheel design, my cheviot hotwires fit over them but only
>just by 1-2mm.
>Paddy
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
