I think I will be ringing around the wreckers tomorrow? what did you pay
for the calipers? and what master cylinder are you going to use the standard
one??
Ryan
>From: "Paddy McMillan" <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: <[EMAIL PROTECTED]>
>Subject: Re: hilux calipers and 200b struts
>Date: Thu, 12 Oct 2000 03:32:25 +0930
>
> Ryan,
> these had girlock calipers not sumitomo`s, there are two types of
>girlock
>caliper one takes the 1091 the other the 1027 pad. the 1027 type is what i
>fitted the hilux calipers to.
> I`d say they would fit the ones you speak of aswell as they use the same
>disc going by the DBA catalog. 253mm diameter as opposed to the 244mm 1091
>type.
> I`m not sure if the hilux calipers will fit on the 1091 type or not tho.
>Paddy
>
>----- Original Message -----
>From: ryan chalmers <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Thursday, October 12, 2000 7:18 AM
>Subject: Re: hilux calipers and 200b struts
>
>
> > Paddy,
> > Were your old calipers the sort that took the squarish pads (sumitomo
> > calipers) pads part number db86? As I think I will have to look into
>these
> > babies.
> > Ryan
> >
> >
> > >From: "Paddy McMillan" <[EMAIL PROTECTED]>
> > >Reply-To: [EMAIL PROTECTED]
> > >To: <[EMAIL PROTECTED]>
> > >Subject: Re: hilux calipers and 200b struts
> > >Date: Tue, 10 Oct 2000 19:04:07 +0930
> > >
> > > ok i bought the calipers today, and they bolted on to the 200b
>struts
> > >and
> > >fit perfectly over the discs, outer edge of disc just above level with
> > >outer
> > >edge of the pad(0.5-1mm), inside edge of pad slightly further towards
> > >center
> > >of disc(~5-10mm) than the 200b pads, had to use the hilux bolts as the
>200b
> > >were a little short on thread, but that was all. damn easy conversion
>for
> > >on
> > >a 200b, havent fitted the struts to me 510 yet but that will be done
>the
> > >next few days.
> > >the calipers were off an 8/81 hilux 4WD, they have 2 small and 2 larger
> > >pistons
> > >the struts were off a 79 200b, 253mm discs not the db1091 pad type
>ones.
> > >the struts will need to be swaped on the 510, 13" wheels may JUST fit
> > >depending on the wheel design, my cheviot hotwires fit over them but
>only
> > >just by 1-2mm.
> > >Paddy
> > >
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Share information about yourself, create your own public profile at
http://profiles.msn.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
