Paddy, all 200B struts are the same, thus the bolt spacing on all is the same
and so the Hilux calipers should fit any 200B strut!
>
>>From: "Paddy McMillan" <[EMAIL PROTECTED]>
>>Reply-To: [EMAIL PROTECTED]
>>To: <[EMAIL PROTECTED]>
>>Subject: Re: hilux calipers and 200b struts
>>Date: Thu, 12 Oct 2000 03:32:25 +0930
>>
>> Ryan,
>> these had girlock calipers not sumitomo`s, there are two types of
>>girlock
>>caliper one takes the 1091 the other the 1027 pad. the 1027 type is what i
>>fitted the hilux calipers to.
>> I`d say they would fit the ones you speak of aswell as they use the same
>>disc going by the DBA catalog. 253mm diameter as opposed to the 244mm 1091
>>type.
>> I`m not sure if the hilux calipers will fit on the 1091 type or not tho.
>>Paddy
>>
>>----- Original Message -----
>>From: ryan chalmers <[EMAIL PROTECTED]>
>>To: <[EMAIL PROTECTED]>
>>Sent: Thursday, October 12, 2000 7:18 AM
>>Subject: Re: hilux calipers and 200b struts
>>
>>
>> > Paddy,
>> > Were your old calipers the sort that took the squarish pads (sumitomo
>> > calipers) pads part number db86? As I think I will have to look into
>>these
>> > babies.
>> > Ryan
>> >
>> >
>> > >From: "Paddy McMillan" <[EMAIL PROTECTED]>
>> > >Reply-To: [EMAIL PROTECTED]
>> > >To: <[EMAIL PROTECTED]>
>> > >Subject: Re: hilux calipers and 200b struts
>> > >Date: Tue, 10 Oct 2000 19:04:07 +0930
>> > >
>> > > ok i bought the calipers today, and they bolted on to the 200b
>>struts
>> > >and
>> > >fit perfectly over the discs, outer edge of disc just above level with
>> > >outer
>> > >edge of the pad(0.5-1mm), inside edge of pad slightly further towards
>> > >center
>> > >of disc(~5-10mm) than the 200b pads, had to use the hilux bolts as the
>>200b
>> > >were a little short on thread, but that was all. damn easy conversion
>>for
>> > >on
>> > >a 200b, havent fitted the struts to me 510 yet but that will be done
>>the
>> > >next few days.
>> > >the calipers were off an 8/81 hilux 4WD, they have 2 small and 2 larger
>> > >pistons
>> > >the struts were off a 79 200b, 253mm discs not the db1091 pad type
>>ones.
>> > >the struts will need to be swaped on the 510, 13" wheels may JUST fit
>> > >depending on the wheel design, my cheviot hotwires fit over them but
>>only
>> > >just by 1-2mm.
>> > >Paddy
>> > >
>>
>
>_________________________________________________________________________
>Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>Share information about yourself, create your own public profile at
>http://profiles.msn.com.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
