Hey Ryan,
What you'll need is a Bosch 016 ignitor. I believe it's an auto
dwell type. Before you change it just put an ohm meter across the reluctor
winding inside your dizzy making sure it's got a fairly low ohm reading. If
it's open circuit, then that's your problem. Also check that 12V is being
fed into the igniton module when the ignition is on.
regards,
George
----- Original Message -----
From: ryan chalmers <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, March 19, 2001 12:05 PM
Subject: ignition module for S2 bluebird
> Listers
> I need to by a new ignition module for my S2 bluebird Dizzy on my L20 1600
> as it is buggered (I think) I have made a heat shield for it and put alot
> of silicon grease (that white stuff) on the base but on weekend was
playing
> up so bad was nearly undriveable and is affecting other elctrics as well.
> Anyway when I ring repco they say there is two types wandering does it
> matter or do I have to get the year correct ?? and if so does anyone no
the
> part numbers or year of a series 2 bluebird ignition module ???
> Thanks in advance
> Ryan
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
