thanks mark i will check it out tonight
Ryan
>From: mark krawczuk <[EMAIL PROTECTED]>
>Reply-To: [EMAIL PROTECTED]
>To: [EMAIL PROTECTED]
>Subject: Re: ignition module for S2 bluebird
>Date: Mon, 19 Mar 2001 16:31:33 +1100
>
>Hello ryan
>
>On 19-Mar-01, you wrote:
>
> > Mark,
> > A diagram would be great, how do I know it it is a reluctor type? It
>has
> > four pins though.
> > Ryan
> >
> >
>hi, on the main shaft you will see a reluctor ( it is actually a magnet) it
>should have 4 points on it, and (one to fire each cylinder) there is a
>small pickup that sits on the side of it. as each high point goes past the
>pickup , each point as it goes past creates a small voltage which is sent
>to trigger the module.
>
> i thing yours might be a hall effect, or optical ignition, the hall
>effect
>is nearly he same but it has a semiconductor that actually sends the out
>put, as the magnet goes past, this type MIGHT be able to be slightly
>modified to suit, will try and chek up on that later.
>
>
> the reluctor has only two wires coming out of it.
>maybe the reluctor setup froma sigma distributor could be fitted, if the
>hole in the reluctor was too big, get a sleeve made up or if too small get
>the shaft machined down.
>
>
> mark
>
>
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
