Mornin list,
I was at a local parts place on the weekend and the guy told me that the
1600's came out with a bracket around the (stock) exhaust pipe that was
connected to the gearbox housing (or somewhere there) to stop vibrations
etc ... Is this guy pullin my leg or is there truth in what he says?
Anyway I have extractors on my twin SU L18 and the extractors vibrate
against either the gearbox housing or the mounting point for the rack
and pinion as its within 5mm of both, this only happens at certain rpms
but is exaccerbated when turning right (weight of engine moving left).
Has anyone had this problem before and fixed it? Or does anyone know
what sort of braket+clamp arrangement I could make up to secure the
extractors to gearbox bellhousing ?
Thanks,
Anthony
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
