Zac if it is a auto loom then you can use the solenoid wire as a kill switch.
Umm Terry isn't the compartment wire on the passenger side strutt tower?? as it has
been on both my wagons and my SSS??
Any how I hope you work it out Zac.
Rick.
--- "Zac Campbell" <[EMAIL PROTECTED]>
> wrote:
>hmm lucky I didn't cut them out then!
>There is not a plug on the end of them though, they have individual plugs
>that look like factory items.
>can I rewire the solenoid wire and bypass those wires?
>
>zac
>
>----- Original Message -----
>From: Terry Rudd <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Sunday, May 20, 2001 9:16 PM
>Subject: RE: mystery wires
>
>
>> Zac,
>>
>> I also think it's an auto loom, those wires match. The Aussie auto has a
>> reverse relay & switch and engine compartment light switch located on the
>> strut tower near where an external voltage reg goes - there is a 6 pin
>> connector plug there for it. If you have an auto loom you may have to
>> connect a few things up to get the solenoid wire to fire when you turn the
>> key to start.
>>
>> regards
>> Terry
>>
>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED]]On Behalf Of Zac Campbell
>> Sent: Sunday, 20 May 2001 9:10
>> To: [EMAIL PROTECTED]
>> Subject: Re: mystery wires
>>
>>
>> Terry, it is a replacement loom which is stock
>> They come out about the drivers side strut tower. I thought it might be an
>> auto loom but still nothing there...
>> Other possiblity is external alternator regulator.
>>
>> Everything else lines up fine so I assume it is a 1600 loom!
>>
>> zac
>>
>> ----- Original Message -----
>> From: Terry Rudd <[EMAIL PROTECTED]>
>> To: <[EMAIL PROTECTED]>
>> Sent: Sunday, May 20, 2001 8:28 PM
>> Subject: RE: mystery wires
>>
>>
>> > Zac,
>> >
>> > I have all of the wiring diagrams for every variety of 1600 that was
>ever
>> > made but I need some more clews, these are on the replacement loom? and
>> you
>> > don't know what they're for.
>> >
>> > Where about on the loom - this is going to be hard to describe but as
>> close
>> > as possible to another component would help.
>> >
>> > regards,
>> >
>> > Terry
>> >
>> > -----Original Message-----
>> > From: [EMAIL PROTECTED]
>> > [mailto:[EMAIL PROTECTED]]On Behalf Of
>> > [EMAIL PROTECTED]
>> > Sent: Sunday, 20 May 2001 4:29
>> > To: [EMAIL PROTECTED]
>> > Subject: mystery wires
>> >
>> >
>> > Hey list, I have just about finished fitting the replacement wiring loom
>> in
>> > but
>> > there are 6 (yes 6!) wires that I cannot find on the wiring loom
>> > They are two Red/Black and one Black/Red, and two Black/Yellow and one
>> that
>> > looks black/yellow.
>> > I can't find them anywhere on the wiring loom diagram.
>> >
>> > Any ideas!?
>> >
>> > zac
>> >
>>
_____________________________________________________________
Get Your free Ozdat Email Account
---> http://www.ozdat.com
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
