Trevor,
What toyota and coronas have the sumitomo twin spot callipers? And would you
happen to have any pics of the callipers? or evern know of a webpage with
pics so i can identify these callipers at the wreckers..
cheers,
Adam
> I picked up some new RDA (Made in Japan) 240K 270mm disks from my local
> autoshop for $80ea. DBA were a lot more expensive. With twin piston
simitomo
> calipers (see the following toyota posts as coronas are plentiful in
> wrecking yards) and bendix ultimates $90 they work well on my race car. I
> think they would be more than acceptable on a street 1600. They should
swap
> onto your 200B struts but beware of the lower control arm to disk and
> caliper to steering arm clearances. I needed to file of a bit here and
there
> to make it all fit.
>
> Regards
> Trev
>
> -----Original Message-----
> From: Terry Rudd [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 10 July 2001 0:02
> To: [EMAIL PROTECTED]
> Subject: RE: 200B Vs 240K struts....
>
>
> Adam,
>
> If I had the choice with all things being equal and they were both
available
> at around the same $ I'd buy the 240K struts too, but I certainly wouldn't
> go out of my way to replace a set of good 200B struts. The 240K are a
> fraction shorter, something like .25" but if you use the 240K insulators
you
> can get ~.5" more but you have to slot the 1600 towers. Any brake that
bolts
> to one will bolt to the other and unless you can get the 270mm discs it's
> not worth the hassle IMHO off course. Most 240K struts I've seen lately
with
> the big discs are so worn they were worth buying but you grab the
callipers
> though if they look half decent.
>
> your choice?
>
> regards
> Terry
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson
> Sent: Sunday, 8 July 2001 5:47
> To: [EMAIL PROTECTED]
> Subject: 200B Vs 240K struts....
>
>
> Sorry for all the questions everyone...but I have bought some 200B struts
> with discs and am wondering if i should get rid of these and go for a set
of
> 240K struts as they seem to be the better choice of the two.
>
> I basically would like to know your opinions on the two strut options.
>
> cheers,
>
> Adam
>
> --membersozdat-------------------------------------------------------
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
> ---------------------------------------------------------------------
>
>
> --membersozdat-------------------------------------------------------
> OZDAT Mailing List Please Note:-
> Send (un)subscribe requests to [EMAIL PROTECTED]
> Send submissions to [EMAIL PROTECTED]
> No unauthorised redistribution of this email
> http://www.ozdat.com/ozdatonline/index.htm
> http://www.ozdat.com/ozdatonline/listindex.html
> http://www.mail-archive.com/[email protected]/
> ---------------------------------------------------------------------
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
