If the rail pressures are too high some injectors opening times will be affected as well. Probably best to just run whatever pressure the injectors ran from the factory.
Tuesday, March 19, 2002, 11:20:33 AM, you wrote: as> The higher the fuel pressure the higher the hp potential the injector will as> flow.Some injectors dont like it as the spray pattern goes crapy and puddles at as> idle. as> mark krawczuk wrote: >> whew,.....thats better, i connected up the fuel pressure gauge, this >> morning and got a MASSIVE 10 psi fuel pressure for the injectors., it >> was running fine before, the reg must have setteled down or some >> thing,........................ >> >> ......nahhhhhh not too good , so i adjusted it up to about 42 psi at >> idle..now its running and revving as it should........ just have to take >> it for a spin later...will 42 lb be okay? some one said 38, some one said >> 42......... >> >> does any body know if its true that if you increase fuel pressure, (efi) >> for every 10 psi increase or so , u get higher hp? >> >> mark k >> -- Best regards, Bob mailto:[EMAIL PROTECTED] --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
