Terry,
The two blue wires don't have any crimp fittings on them, they look like
they've been cut and stripped. They do loop through the plate with the
'long screw thingy' like you said. The green wire has a spade crimp and the
black has also been cut. They go into the centre of the back, there is no
grommet but it's probably just fallen off at some stage. If you can give me
some ideas i'd really appreciate it.
Thanks.
----- Original Message -----
From: Terry Rudd <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, March 19, 2002 11:31 PM
Subject: RE: Tacho Wiring
> Alan,
>
> We have to identify exactly which tacho you've got here, the wiring
colours
> are a bit different to what I've seen and wired into other 1600's.
>
> 2 x Blue wires? the 1600 SSS pulse tacho wires are normally white, the
power
> is red and the earth is green. The electronic type has 4 different
colours,
> i.e. white, red, green & black. One thing for sure is whatever type it is
> both blue wires wont connect to the -ve side of the coil. Do the blue
wires
> loop through a small shiny plate with a long screw thingy sticking up at
the
> bottom of the tacho and the other two wires go into a rubber grommet in
the
> centre of the back of it? Do the blue wires have connectors on the ends eg
a
> male spade on one and a female spade on the other? I'm thinking you've got
> an in series and the other two wires will be +12v and earth but which is
> which.
>
> Is it a 1600 tacho you've got, a 180B SSS tacho has 2 x blue/black wires
but
> the other 2 wires are red and green so I don't think that's what you've
got.
>
> If you give me some more detail that I've asked for I should be able to
tell
> you how to wire it up.
>
> regards
> Terry (anyone seen this wiring combo in a 1600 tacho)
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED]]On Behalf Of Alan Attwood
> Sent: Tuesday, 19 March 2002 5:14 PM
> To: [EMAIL PROTECTED]
> Subject: Tacho Wiring
>
>
> Hi yal.
> Just got myself a SSS tacho (apparently from a GL, you may have seen
the
> ad in the ozdat classifieds). I'm not 100% sure how it hooks up, there's
> two blue wires, a green and a black. Apparently the blue wires connect to
> the negative terminal on the coil, but I don't know about the other two.
>
Thanks.
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
