Hi Terry, I was under the impression that 195/50 R15s were close to the stock 1600 tyres? (Are the stock tyres 165/75 R13?)
I did some calcs on static diameters based on the above tyre being stock, but didnt check manufacturers revs/distance measurements... Andrew > Adam, > > I've seen 195/45x15 on H*ondahs - IMHO they look damn silly, 195/50 are also > popular on 1600/180B but they are much smaller than the stock tyres rpm > wise, they are very similar to running one diff ratio lower. 195/55 series > are close to perfect for a 1600/180B but for some reason only the exy top > end stuff make that size where as the cheapies come in 50 series to get the > H*ndahs & Excels, 195/65 or 205/60 are about right for 200B/Bluey. Also I've > found the 50 series 15" tyres are off the comfort scale to but 55 are very > nice and handle just about as well. > > regards > Terry > > > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Adam Jackson > Sent: Sunday, 24 March 2002 9:20 PM > To: [EMAIL PROTECTED] > Subject: Re: TRX Wheels > > > how much were these tyres? > > while on the topic of TRX rims. What is the lowest profile you can go to? I > just bought some trx rims last week and would like some nice neat low > profile tyres on them. > > cheers, > Adam > > ----- Original Message ----- > From: "Ben" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, March 25, 2002 12:18 PM > Subject: Re: TRX Wheels > > > > a539s are beautiful, i have them on my car, they stick like glue. > > > > ----- Original Message ----- > > From: "Paul Stanley" <[EMAIL PROTECTED]> > > To: "OZDAT Mailing list" <[EMAIL PROTECTED]> > > Sent: Saturday, March 23, 2002 5:40 PM > > Subject: TRX Wheels > > > > > > > I bought some 15" TRX mags the other day for my 200B. I want to put 205 > > on > > > the rear and 195 on the front, but I'm open to suggestions. I am not > going > > > to spare any expense on tyres, I'm after a quiet comfortable ride. > > > > > > I'm wondering what the highest profile I can go with the above widths on > > the > > > live axle 200B with stock suspension, and what would be the correct > > profiles > > > so the speedo would have a correct reading? > > > > > > I did ask this before and James recommended Yokohama A539. > > > > > > > > > From: Paul Stanley > > > [EMAIL PROTECTED] > > > [EMAIL PROTECTED] > > > [EMAIL PROTECTED] > > > > > > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
