Thanks Mark and Daniel - do you need special silicon to do the job
(for the heat?). That anti-squeal stuff - how do you get the pads out
next time you want to change them??

Sunday, June 23, 2002, 12:50:24 AM, you wrote:

DK> I just use a small amount of silicon on the piston face, usually does the
DK> trick for keeping the pads off the disk when you don't have your foot on the
DK> brake!

DK> Daniel Kroehn

DK> ----- Original Message -----
DK> From: "mark krawczuk" <[EMAIL PROTECTED]>
DK> To: <[EMAIL PROTECTED]>
DK> Sent: Saturday, June 22, 2002 11:05 PM
DK> Subject: Re: Brake Squeal


>> hi, there is a anti squeal  stuff, it is actually a type off glue that you
>> put on the back of the pad so that it sticks to the caliper piston. the
>> squeal is actually a sorta vibration between the pad and piston.
>> try some supaglue  or maybe contact type cement.
>> i have  roughened the pads up and that worked  for a while.
>> also try putting a few very slight cuts in the pads witha hacksaw.
>>
>>  mark k
>>
>> ----- Original Message -----
>> From: "Bob" <[EMAIL PROTECTED]>
>> To: <[EMAIL PROTECTED]>
>> Sent: Saturday, June 22, 2002 9:51 PM
>> Subject: Brake Squeal
>>
>>
>> > Hello membersozdat,
>> >
>> >   I just changed the front pads in the 260z, half cause they werent at
>> >   thier best, half cause they were squealing a bit and I was told that
>> >   in those brakes they start to squeal when the pads get low. So I
>> >   replaced them and they were quiet (and better) initially, but now
>> >   10km later they are squealing worse than the old ones, what could be
>> >   causing this? The pads I put in were ferodo excel. Is there meant to
>> >   be some kind of anti squeal shim in there? My knowledge of
>> >   caliper/pads etc is pretty poor, so sorry if this is an obvious
>> >   question.
>> >
>> > --
>> > Best regards,
>> >  Bob                          mailto:[EMAIL PROTECTED]
>> >
>> >
>>




-- 
Best regards,
 Bob                            mailto:[EMAIL PROTECTED]

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to