What state are you in Mark,
Im a Perth-ite, Cheers CHris S Mark O'Conner writes: > Chris, > > I have some 240K Kmac springs to suit if your interested > > Mark > ----- Original Message ----- > From: Chris Simpson > To: [EMAIL PROTECTED] > Sent: Tuesday, July 09, 2002 10:27 PM > Subject: <Unknown Subject> > > > > > Listers, > > Ive just installed 240K Struts and brakes and my car now looks like a rally > car at the front, not the idle look when the back is nice and low! But > anyway what i want to know is do the std 1600 springs bring the height back > down to how it should be? > > Looking through the history i have been able to get it down to this. > > "You can use 1600 springs with 240K struts as they're the same diameter. > It's very unlikely that they will vary the suspension height much as a > stock > height 1600 spring for 70+ struts are fairly short in comparison to 240K > springs. " Terry Rudd > > Is any one able to tell me how much shorter the 1600 springs are? and > IMPORTANTLY will they remain captive in the 240K struts? THis car has to > go over the pits and as such they must be captive. > > I only have a set of lowered Laser springs that were in the 1600 struts > that were in the car, other wise i'd just try it. > > Thanks > > Chris S > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
