|
Zac u can't get your ex housing machined to suit
the new wheel?
Heath
----- Original Message -----
Sent: Wednesday, October 30, 2002 4:47
PM
Subject: Re: free 1600
Hey Andrew, it is a series 5 rx7 turbo. the local
turbo place got the turbo off for a fair fee :( they used the oxy torch
method!
But now I have the problem of my exhaust housing
not fitting on the rx7 turbo! the rx7 exhaust wheel is way too big.
Can I swap the old wheel onto this turbo myself
or does it need to be rebalanced? What socket do I use, the nuts are odd! It
looks like that would be the way to make it all happen.
The rx7 turbo spins about 5 times more easily
than my old turbo!
cheers,
zac
----- Original Message -----
Sent: Tuesday, October 29, 2002 11:56
PM
Subject: Re: free 1600
I laughed as soon as i saw the stripe.Just like the black one
i got for $50.But at least this one isnt painted in house paint.
Depending on the type of turbo the exhaust housing goes onto a bit of a
taper and has a heat shroud between the housing and the cartrige.Ive only
ever had to spray some wd40 then hit the ex housing with a hamer whilst
holding the cartrige in my hand.I always use some never sieze on the bolts
and housing when assembling them.
Zac Campbell wrote:
what is it with you and cheap 1600s with
stripes!!!
also do you have any tips for getting an exhaust housing off? I've got
a new
turbo and the housing is stuck on. It is currently doused in
WD40, hopefully
that will help it off tomorrow morning.
zac
----- Original Message -----
From: "andrew smith"
<[EMAIL PROTECTED]>
To:
<[EMAIL PROTECTED]>
Sent: Tuesday, October 29, 2002
10:59 PM
Subject: free 1600
> Here's a couple of pics of the free 1600 i scored up yesterday.The
front
> and rear bumpers are damaged and the drivers side front
fender is pretty
> rough but otherwise its in pretty good
condition.The person who owned it
> actually paid my mate to
dispose of it.
> http://photo.starblvd.net/datsqik/2-2-2-1036688166?m=0&pg=1&ro=1&co=1
> http://photo.starblvd.net/datsqik/2-2-3-1036977249?m=0&pg=1&ro=1&co=2
> http://photo.starblvd.net/datsqik/2-2-4-1037605546?m=0&pg=1&ro=1&co=3
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe
requests to [EMAIL PROTECTED]
Send submissions
to [EMAIL PROTECTED]
No unauthorised redistribution
of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
