hi, hmmmm i sorta prefer the  mechanical type, as long as u use a copper
oil line.

mark k
----- Original Message -----
From: "Ben C" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Sunday, November 03, 2002 9:37 PM
Subject: Re: smaller oil filter


> dont use a mechanical oil gauge!
> i learnt my lesson by having hot sump oil spray all over my leg
>
> just buy a gauge (electrical), its comes with the sensor to screw in place
of the switch you have
>
> -----Original Message-----
> From: Mark Firman <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Date: Sun, 3 Nov 2002 02:28:37 -0800 (PST)
> Subject: Re: smaller oil filter
>
> Sorry, i don't really understand what you are trying to explain Richard,
but it does sound like what i want :)
> Can anyone describe this method or any other easy/cheap way to hook up an
oil pressure guage in a 1600??
> Thanks heaps,
> mark
> --- "Richard Webb" <[EMAIL PROTECTED]> wrote:
> >I'd put a manual guage on, which requires pipe from the engine to the
car.
> >You also need a T piece if you want the old oil pressure light to work,
> >which is recomended. Aparently the manual guages are good cos if the
engine
> >is pinging, you can hear it on the glass easily. Im not sure as I havent
got
> >one yet. I will invest soon.
> >
> >Rich
> >----- Original Message -----
> >From: "Mark Firman" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Saturday, November 02, 2002 4:57 PM
> >Subject: Re: smaller oil filter
> >
> >
> >> Just on the topic of oil filters and oil pressure switches,
> >> can you hook up a oil pressure guage to the standard oil switch (small
> >ones)??
> >> Or do you need a different pressure switch that isn't just an 'on' or
> >'off' switch like for the warning light?
> >> If you do need a different one, where could i get one from?? and how
much
> >would it be??
> >> Thanks
> >>
> >> --- Rick White <[EMAIL PROTECTED]> wrote:
> >> >Hmmm.
> >> >I have a old Ryco parts manual somewhere that specifies Z37 for the
SSS
> >510.
> >> >Also a oil pressure switch, for the idiot light is tiny.
> >> >The oil guage on My SSS is HUGE and that is a under statement.
> >> >It was the first thing I noticed when I went to see her for the first
> >time, which is the day I bought it.
> >> >I thought silly buggars bought the wrong oil filter and pressure
switch.
> >> >The oil filter was the last one the bloke who I bought it of had, and
you
> >could just work out the DATSUN logo on it. I was amased it still had a
> >factory oil filter on it.
> >> >About 6 months later the oil pressure sender broke down, I went to
Nissan
> >and they got me what they said was the last genuine pressure switch in
> >existence, it was even packaged in a Datsun box.
> >> >Just remember the old style oil pressure senders were KPA or some
thing
> >not pounds or what ever the new guages are.
> >> >You deffiantly could not get the plain old oil filter that I had
fitted
> >on my wagon at the time, it would have to be dented to get around the
> >pressure switch.
> >> >Hense the long time searching for a Ryco parts book that actually had
the
> >SSS listed seperately with Z37 listed as the oil filter.
> >> >If you look at the standard oil filter and see the rubber O-Ring the
Z37
> >is just a tad wider than that O-Ring and is the same length.
> >> >Later.
> >> >Rick White.
> >> >
> >> >--- "maldat" <[EMAIL PROTECTED]> wrote:
> >> >>Z101 is the oil filter
> >> >>Bigger is better
> >> >>the oil switchs are all the same sss or not  or L16-L20B
> >> >>
> >> >>Malcolm
> >> >>----- Original Message -----
> >> >>From: "Rick White" <[EMAIL PROTECTED]>
> >> >>To: <[EMAIL PROTECTED]>
> >> >>Sent: Saturday, November 02, 2002 2:02 PM
> >> >>Subject: smaller oil filter
> >> >>
> >> >>
> >> >>> Yes
> >> >>> Z37 is the replacement part for the SSS.
> >> >>> It isn't much smaller, as it is the same length, it is just
skinnyer.
> >> >>> These were the factory used to clear the guage type oil pressure
> >switches.
> >> >>> I hope this helps you.
> >> >>> Later.
> >> >>> I have run one of these in every 1600 I have owned.
> >> >>> Rick White.
> >> >>>
> >> >>> --- message from "mark krawczuk" <[EMAIL PROTECTED]> attached:
> >> >>>
> >> >>> _____________________________________________________________
> >> >>> Get Your free Ozdat Email Account
> >> >>> ---> http://www.ozdat.com
> >> >>>
> >> >>> _____________________________________________________________
> >> >>> Select your own custom email address for FREE! Get
[EMAIL PROTECTED]
> >w/No
> >> >>Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag
> >> >>>
> >> >>
> >> >
> >> >_____________________________________________________________
> >> >Get Your free Ozdat Email Account
> >> >---> http://www.ozdat.com
> >> >
> >> >_____________________________________________________________
> >> >Select your own custom email address for FREE! Get [EMAIL PROTECTED]
> >w/No Ads, 6MB, POP & more!
http://www.everyone.net/selectmail?campaign=tag
> >> >
> >>
> >> _____________________________________________________________
> >> Get Your free Ozdat Email Account
> >> ---> http://www.ozdat.com
> >>
> >> _____________________________________________________________
> >> Select your own custom email address for FREE! Get [EMAIL PROTECTED]
w/No
> >Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag
> >>
> >
>
> _____________________________________________________________
> Get Your free Ozdat Email Account
> ---> http://www.ozdat.com
>
> _____________________________________________________________
> Select your own custom email address for FREE! Get [EMAIL PROTECTED] w/No
Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag
>
>
>
>
>
>

--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/membersozdat@;datascribe.com.au/
---------------------------------------------------------------------

Reply via email to