Alan, 1600/180B callipers are 3" bolt spaced and 240K/C210/200B are all 3.5" so short answer to first question is no.
The spring question is a tad more difficult to answer as there are many different length King springs. The general answer is the ride height with 240K struts & springs wont be too low subject to the spring specs. Most ppl use 1600 springs with 240K struts and this results in around 330 - 340mm suspension height but it's not absolutely necca to do so. Stock 240K struts and springs in a 1600 are around the 360-370mm range. regards Terry -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alan Attwood Sent: Tuesday, 28 January 2003 4:36 PM To: [EMAIL PROTECTED] Subject: another quick spring question List I've found a set of earlier 240K struts (had single spot calipers) with king springs. Will the standard 1600 brake calipers, discs etc bolt up to these????????? Also, will the ride height be too low???? Thanks. --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
