I use ordinary center drills usually #3 TIN coated about .006 to .012 in depth depending on the size. And about 8 IPM. Does a good job for us.
Dave Wolfgang H&R Industries. Inc ----- Original Message ----- From: <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, March 16, 2000 12:57 PM Subject: [mfg-smartcam] Engraving > HI all, > There's been some talk of engraving lettering in different fonts. I > would like to ask what methods you use to do your engraving? I've been > using a 1/16" carbide ball em about .005 deep for small lettering in the > range of 3/16 to 1/4 high. I was wondering if any of you would share some > methods (tools, feeds, speeds) that you've found to be successful. > > Chris > > ====================================================================== > To find out more about this mailing list including how to unsubscribe, > send the message "info mfg-smartcam" to [EMAIL PROTECTED] > ====================================================================== > ====================================================================== To find out more about this mailing list including how to unsubscribe, send the message "info mfg-smartcam" to [EMAIL PROTECTED] ======================================================================
