And if you cleaned the throttle plate, you may have cleaned off the coating that helps seal the butterfly to the bore, letting more air by/creating high idle.
Bill Cardell TurboDog's Dad www.flyinmiata.com www.fmwestfield.com orders 1-800-FLY-MX5S tech support 970-464-5600 Don't miss Flyin' Miata's Open House! Aug 14-17, 2008 ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ray Ayala Sent: Monday, May 19, 2008 7:58 AM To: Frank Devocht; [email protected] Subject: Re: Link mk1 - High idle problem Have you tried closing the idle screw a bit? When (if) you do get it to idle below 1K rpm, what's the ECU's IAC setting. Also, some IACs (Mazda used two different sources) have a fail-safe mode that puts them in high-idle mode if the IAC drive signal fails so you might try simply unplugging the IAC electrical connector and see if it behaves any differently. ----- Original Message ----- .....The problem got worse after I cleaned the throttle body and air filter ...
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
