I believe so on the fronts, but not sure.. haven't replaced them yet.
That didn't work on my car.. I jerked it in all directions loaded and
unloaded, *no* slop.. but it made noise spinning it. I jacked the car up
and idled it in 5th and it was a constant rrrrrrrrrrrrrrrrr noise emanating
from the wheel area. Spinning the hub without brake hardware you could
feel notchy-ness and hear the bearings. Even disassembly didn't indicate
badness, but it was bad.
I've heard that too, but I don't subscribe.. it's no easier or cheaper to
do it at the same time, the only thing you save is potential down time (do
it all one day vs two half days). The argument goes that if the left wore
out, the right isn't far behind.. but that's not always true. Something
things I do agree (springs, shocks, tires, socks) but not for bearings.
IMNSHO.
Wally
Ross Kuhns
<[EMAIL PROTECTED]>
To
10/23/2008 10:14 AM <[EMAIL PROTECTED]>,
<[EMAIL PROTECTED]>
cc
Luis <[EMAIL PROTECTED]>,
<[EMAIL PROTECTED]
r.net>,
<[email protected]>
Subject
RE: replacing wheel bearings
or for the fronts you can just replace the whole hub correct?
To test you don't need to jack it up, we always give a good hard pull in a
couple axis' at autox safety tests and you can tell a bad one - compare
yours to another miata or two.
*on a side note, I saw where one of the track guys, oh it was Emilio,
recommended always replacing the hubs in pairs, i.e. "if you do one side,
do the other as well". Any idea why? I replaced one of my fronts last year,
but not the other.
Ross Kuhns
Subject: Re: replacing wheel bearings
To: [EMAIL PROTECTED]
From: [EMAIL PROTECTED]
Date: Thu, 23 Oct 2008 08:52:29 -0400
CC: [EMAIL PROTECTED]; [EMAIL PROTECTED];
[email protected]
I just did a left rear, rumble with the top up, shake test had zero slop in
any axis.. was bad, tho. Replaced and noise went away, car also tended to
track lane crowns worse as the wheel would toe in/out as it interacted with
the crown. That has lessened with the new bearing.
You either need a press or a gear puller. I found this writeup very helpful
(and I had to use my oxy/acet torch to get the bearing race to move).
http://forum.miata.net/vb/showpost.php?p=1361125&postcount=14
http://forum.miata.net/vb/showpost.php?p=1361129&postcount=15
There was a secondary writeup that had pictures that helped a ton.. This is
how I did it, and it worked fine (with the torch, race wouldn't move
without it)
http://my.att.net/p/s/community.dll?ep=87&subpageid=222341&ck=
You may also need the snap ring.
Longer studs, I believe corvette ones work, but I don't rememebr more
specifics.
Wallyman
Inactive hide details for Ashraf Farrag <[EMAIL PROTECTED]>Ashraf
Farrag <[EMAIL PROTECTED]>
Ashraf Farrag
<[EMAIL PROTECTED]
sccnc.org>
Sent by: To
miatapower-bounc
[EMAIL PROTECTED] Luis
t <miata.guru
10/23/2008 12:05 @gmail.com>
AM
cc
Please respond to miatapower@
[EMAIL PROTECTED] miatapower.
net
Subject
Re:
replacing
wheel
bearings
> So now I'm suspecting the wheel bearings. Since the car is 10 years
> old and has 80K miles, 50+ track days, and 20+ autocrosses on it, I'm
> thinking maybe it's time to just do all of them.
>
Wheel bearings make a "rumbling" noise as it has been
described/characterized to me.
Shake/wobble test? Lift car, grab wheel at top and bottom and try to
wiggle and feel for play in the bearing. If there is play, you'll feel
it and it will sort of "click" but you should also make sure it isn't a
worn suspension joint. The FSM outlines a more precise test involving a
dial indicator gauge. Kind of expensive to replace all four if not
needed, IMHO but not a bad idea if the car is a track car. If you even
suspect wheel bearings, you should not be driving it.
Half-shafts and driveaxle checked?
--Ashraf
_______________________________________________
Miatapower mailing list
[email protected]
http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
<<inline: graycol.gif>>
<<inline: pic00474.gif>>
<<inline: ecblank.gif>>
<<inline: C7504910.gif>>
<<inline: C7595738.gif>>
<<inline: C6196514.gif>>
<<inline: C5509330.gif>>
<<inline: C3722995.gif>>
<<inline: C2850767.gif>>
<<inline: C2752546.gif>>
<<inline: C5209476.gif>>
<<inline: C5279569.gif>>
_______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
