I'm pretty sure you're going to get some leak past the throttle plate and through the idle screw otherwise the car would never idle.
Larry White Knight 1991 Crystal White #99 CSP Silver Bullet 1992 Silverstone #17 SM2 FM I+ Turbo Honey B 1992 Sunburst Yellow #99 SM2L JR Supercharger Whooosh 2004 Titanium Mazdaspeed MX-5 LowCountry Miata http://www.lowcountrymiataclub.net Masters Miata RAGS 074 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Rob Ebersol Sent: Friday, January 30, 2009 5:09 PM To: List Miata Power Subject: Vacuum leak: 1.6 throttle body With the idle screw totally shut, throttle body plate closed, car not running, I put about 15psi on the turbo compressor inlet and I'm getting reasonable amount of air to the intake manifold. Is a partially leaking acceptable or should the tb plate (and both air valves) totally seal off the manifold? _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
