Rob, If the Link goes down to 15% in the idle window, it means it has closed the IAC as much as possible. If your idle is still too high, then you have extra air (as long as the IAC is functioning).
TurboDog's Dad Bill Cardell www.flyinmiata.com 1-800-FLY-MX5S 970-464-5600 tech support Don't miss our Open House! August 14-17 -----Original Message----- From: Rob Ebersol [mailto:[email protected]] Sent: Sunday, February 01, 2009 6:45 PM To: Bill Cardell Cc: List Miata Power Subject: Re: Vacuum leak: 1.6 throttle body Does that seem like excessive flow by the plate? I don't know the origin of tb, but I'll try the paint thing. It was cleaned before it was installed, but not with anything caustic... not to say that it hadn't been done prior to that. I messed with the stop way back, but I didn't check the actually flow by the tb with it shut, only checked the idle change. I'll look at it and try the paint. thanks. On Feb 1, 2009, at 8:37 PM, Bill Cardell wrote: > Have you ever messed with the butterfly stop adjustment? Have you ever > cleaned the butterfly with carb spray? You can take a look at the stop > screw adjustment, maybe it's not letting the plate close all the way. > Or, if you have sprayed it, maybe you dissolved the coating that helps > seal the butterfly to the bore. If so, you can clean it and hit it > with some spray paint to help seal the butterfly. > _______________________________________________ Miatapower mailing list [email protected] http://list.miatapower.net/cgi-bin/mailman/listinfo/miatapower
