Hi,
I can't seem to get any sound when I run aucat -l. In /usr/lib I
have libsndio.so.3.2 as my only libsndio.so. I've ran
make DO_AUTEST=1 and didn't get any errors.
I have export SDL_AUDIODRIVER=libsndio in my .profile. I have
env SDL_AUDIODRIVER=libnsdio <prog> statemens for some of the
applications in my window manager's (IceWM) menu.
If I run the applications after killing aucat in server mode, then I
get sound. Applications that call directly on aucat, ie; Pidgin -
aucat %s, have sound, but then again only when _not_ running aucat in
server mode.
I think I've missed something obvious, but I'm not too sure where at
this point. I'd welcome any suggestions, thanks.
OpenBSD 4.4-current (GENERIC) #1627: Thu Dec 18 21:22:00 MST 2008
[email protected]:/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) processor ("AuthenticAMD" 686-class, 256KB L2 cache) 1.20
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 804810752 (767MB)
avail mem = 769384448 (733MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/13/01, BIOS32 rev. 0 @ 0xfb5d0, SMBIOS
rev. 2.2 @ 0xf0800 (38 entries)
bios0: vendor Award Software International, Inc. version "6.00 PG" date
07/13/2001
bios0: Gigabyte Technology Co., LTD 7DXR
apm at bios0 function 0x15 not configured
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP
acpi0: wakeup devices SLPB(S5) PCI0(S5) USB0(S4) USB1(S4) UAR1(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
bios0: ROM list: 0xc0000/0x8000 0xcc000/0x4000! 0xd0000/0x4000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "AMD 761 PCI" rev 0x13
amdagp0 at pchb0
agp0 at amdagp0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "AMD 761 PCI-PCI" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "ATI Mach64" rev 0x27
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "VIA VT82C686 ISA" rev 0x40
pciide0 at pci0 dev 7 function 1 "VIA VT82C571 IDE" rev 0x06: ATA100, channel 0
configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 6Y080L0>
wd0: 16-sector PIO, LBA, 78167MB, 160086528 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets, initiator 7
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4120B, 2.03> ATAPI 5/cdrom
removable
atapiscsi1 at pciide0 channel 1 drive 1
scsibus1 at atapiscsi1: 2 targets, initiator 7
cd1 at scsibus1 targ 0 lun 0: <BENQ, CDRW 5232X, KPBY> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "VIA VT83C572 USB" rev 0x1a: irq 11
uhci1 at pci0 dev 7 function 3 "VIA VT83C572 USB" rev 0x1a: irq 11
viaenv0 at pci0 dev 7 function 4 "VIA VT82C686 SMBus" rev 0x40: failed to map
PM I/O space
rl0 at pci0 dev 12 function 0 "D-Link Systems 530TX+" rev 0x10: irq 10, address
00:50:ba:59:24:c3
rlphy0 at rl0 phy 0: RTL internal PHY
eap0 at pci0 dev 14 function 0 "Ensoniq CT5880" rev 0x03: irq 5
ac97: codec id 0x83847608 (SigmaTel STAC9708/11)
ac97: codec features 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
uhci2 at pci0 dev 15 function 0 "VIA VT83C572 USB" rev 0x50: irq 11
uhci3 at pci0 dev 15 function 1 "VIA VT83C572 USB" rev 0x50: irq 10
ehci0 at pci0 dev 15 function 2 "VIA VT6202 USB" rev 0x51: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
pciide1 at pci0 dev 16 function 0 "Promise PDC20265" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using irq 11 for native-PCI interrupt
pciide1: channel 0 disabled (no drives)
pciide1: channel 1 disabled (no drives)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
biomask fddd netmask fddd ttymask ffdf
mtrr: Pentium Pro MTRR support
uhidev0 at uhub1 port 2 configuration 1 interface 0 "KYE USB MOUSE" rev
1.10/0.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
--
W. Steven Schneider <[email protected]>
