I like that, thanks!

Should also work with a 555 since it will source and sink?  I'm
looking to add it to All Spectrum's uC kit.  Somehow I never got into
uC programing, so I end up buying it from someone else.

On Jan 9, 9:03 pm, John Rehwinkel <[email protected]> wrote:
> > I once saw a method for getting BOTH halves of the NE-2 to light up.
>
> > img503. imageshack. us /img503 /4753 /neondrivetj5.gif
>
> > I have never gotten it work.  Anyone have any suggestions on making it
> > work right?
>
> It attempts to derive the drive for the second transistor by phase shifting 
> the pulses with the capacitor.  It would tend to work well only at one 
> frequency.  Here's the approach I use:
>
> http://www.vitriol.com/images/tech/ne2both.gif
>
> High input lights one side, low lights the other side, a square wave 
> oscillates between them.  At one hertz, this makes a nice colon indicator, 
> hopping back and forth visibly between the electrodes.  At a hundred hertz or 
> higher, both appear to be lit.  You can use a transistor as the inverter, or 
> drive both transistors directly from microcontroller I/O pins - if you do it 
> that way, if you turn both transistors on or off at the same time, the light 
> will go out.  If one is on and one is off, you light one electrode.
>
> - John

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/neonixie-l?hl=en-GB.

Reply via email to