>> http://www.vitriol.com/images/tech/ne2both.gif
>> 
>> High input lights one side, low lights the other side, a square wave 
>> oscillates between them.  At one hertz, this makes a nice colon indicator, 
>> hopping back and forth visibly between the electrodes.  At a hundred hertz 
>> or higher, both appear to be lit.  You can use a transistor as the inverter, 
>> or drive both transistors directly from microcontroller I/O pins - if you do 
>> it that way, if you turn both transistors on or off at the same time, the 
>> light will go out.  If one is on and one is off, you light one electrode.

> I like that, thanks!
> 
> Should also work with a 555 since it will source and sink?

Should work just dandy with a 555.

- John


-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/neonixie-l?hl=en-GB.

Reply via email to