> I tried the circuit with the following values: R4=R3=22k ohm and
> R1=R2=220k ohm  Q1=MPSA42 and Q2=MPSA92 HV= 180 VDC TP1=5 VDC
> 
> Only half of it worked (one electrode lights).  If I only use MPSA42
> that part of the circuit works fine (made a test circuit with only the
> NE-2, a transistor and the required resistors).  If I replace put the
> MPSA92 in, the NE-2 stays on, no matter if the 0V or 5V is applied to
> the base.  I've tried 2 MPSA92's fresh from the package and still no
> luck.  What am I missing?

They're both NPN - use MPSA42 for each of them.

- John

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/neonixie-l?hl=en-GB.

Reply via email to