Oops!  Use the right transistor and it works a lot better.  I used a,
astable 555 and a second 555 as a not gate, and it works!  I have it
as a little less than a hertz and it looks pretty neat passing the
light between the two electrodes.  I'll crank up the time base to
something a lot higher and should be fine.

Thanks to everyone!  I really appreciate the help.  I owe you some
beers.

On Jan 10, 10:35 pm, John Rehwinkel <[email protected]> wrote:
> > I tried the circuit with the following values: R4=R3=22k ohm and
> > R1=R2=220k ohm  Q1=MPSA42 and Q2=MPSA92 HV= 180 VDC TP1=5 VDC
>
> > Only half of it worked (one electrode lights).  If I only use MPSA42
> > that part of the circuit works fine (made a test circuit with only the
> > NE-2, a transistor and the required resistors).  If I replace put the
> > MPSA92 in, the NE-2 stays on, no matter if the 0V or 5V is applied to
> > the base.  I've tried 2 MPSA92's fresh from the package and still no
> > luck.  What am I missing?
>
> They're both NPN - use MPSA42 for each of them.
>
> - John

-- 
You received this message because you are subscribed to the Google Groups 
"neonixie-l" group.
To post to this group, send an email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/neonixie-l?hl=en-GB.

Reply via email to