I am climbing stairs from the foot of the mountain to sit at the feet of all you nixie gurus.
What is the current state of the art for remote driver boards? I am aware some of the older drivers are not as reliable or can cause the tubes to degrade quicker. Some of the new options I am seeing have "cathode poisoning prevention" I have recently come upon qty 6 of the NL8091's and their original sockets and socket mounting plate, which I wish to reuse for a clock. Are there any off the shelf boards even capable of driving this tube? I was looking at a board on ebay that comes with an IR remote but it seems too good to be true, I would be willing to spend 5 times as much for a board that was properly documented and put together and had some sort of pedigree... Thanks in advance for any advice or direction you can give. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/2d85b78a-4fa1-4d4e-9356-b2d5a0f85b29n%40googlegroups.com.
