Thanks for the reply Armando. That helps, but I'm still not exactly sure how to get to the track assign modules if I need to replace that op-amp, unless I misunderstood your response. Do I need to go in through the rear of the console to service the track assigns? Bill
On Sun, Feb 14, 2010 at 8:32 PM, Armando Velazquez <[email protected]> wrote: > Hi Bill > > I have reconstructed all my S3...hiss, it's probably a burnt IC, between the > chain channel> bus, could be either the 2.2mF capacitor, if the change, > nothing happens, you should check the bus module, also using TL084. To > access this module, you will have to carefully disassemble from behind the > console, be careful, because a small cable connects all buses! If you make a > mistake you can disable 1 or more channels! I hope this helps. If not, feel > free to ask. > > Let me know, if you want to sell the S3, or if you know who sells S2. > > The best for you !!!! > > KB > > www.myspace.com/testaestudio > Cel: 4771351724 > > > > >> Date: Sun, 14 Feb 2010 19:01:03 -0800 >> Subject: NEOTEK: Series III repair question >> From: [email protected] >> To: [email protected] >> >> Hi, I'm new to the list - I searched the archives and didn't see where >> my question had been discussed before, so I'll ask it here, sorry if >> it has been a topic before. I have a friend with a Series III console >> with two bad output channels, 17 and 18. The inputs are all OK, and >> can be assigned to any channels other than 17 and 18. We can assign >> any input to 17 and 18 and all we get is hiss. I have the full >> schematics for the console, and it looks to me the problem is likely >> with the output amp on the track assign module. The question I have >> is how to best access that module, it doesn't appear as though it can >> be removed from the top of the console like the inputput module due to >> all the bus wires running between the modules. Any help with this >> would be greatly appreciated. Thanks in advance for any help. >> Bill Dunham >> San Jose CA. >> ------ >> >> View the list online at: http://www.mail-archive.com/[email protected] >> >> You can unsubscribe at anytime by sending an email to >> mailto:[email protected] with "unsubscribe neotek" in the message >> body. If you have any difficulties, or questions --please send an email to >> mailto:[email protected]. >> >> The Neotek list is lovingly hosted by Catapult Web. Remember that any >> message or reply sent to the list will be automatically forwarded to all >> subscribers. >> >> Vive Le Neotek! >> >> Thanks. > > ________________________________ > En Messenger están mis contactos con los que sí tengo contacto ------ View the list online at: http://www.mail-archive.com/[email protected] You can unsubscribe at anytime by sending an email to mailto:[email protected] with "unsubscribe neotek" in the message body. If you have any difficulties, or questions --please send an email to mailto:[email protected]. The Neotek list is lovingly hosted by Catapult Web. Remember that any message or reply sent to the list will be automatically forwarded to all subscribers. Vive Le Neotek! Thanks.
